DLS Series Safety Guidelines Thank you for purchasing the DLS Series car speakers. Although Dual has attempted to make sure all of the information contained within this manual is accurate, please be aware that any part of it is subject to change without notice.
INSTALLATION DLS Series Wiring Important: Pay attention to the positive and negative polarity Left Right • Connect the speaker outputs from the head unit to the speakers. • In some vehicles, it may be possible to utilize the existing speaker wiring. When doing this, be cautious of the polarity (+/-) of the speaker wires, as these wire colors vary for each vehicle.
INSTALLATION DLS Series Mounting 1. Determine where the speakers will be mounted. Make sure the area is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for Grille the speaker to fit. 2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
1. Before you call for service, check the rights. You may also have other rights troubleshooting guide in your owner’s which vary from state to state. Dual Electronics Corp. warrants this product manual. A slight adjustment of any to the original purchaser to be free from...
Page 7
Please keep your original sales receipt and be prepared For Your Records to provide it in the event you require service. Your original receipt is considered the best proof of purchase and indicates the date you purchased your Dual product. Dealer Name Dealer Phone Purchase Date Register your product online at www.dualav.com...