Insignia NS-50L260A13 User Manual page 15

Insignia 50" LCD TV
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 1 (DVI) jack on the side of your TV.
Cable or satellite box
5 Connect a 3.5mm audio cable (not provided) to
the PC IN AUDIO jack on the side of your TV and
to the AUDIO OUT jacks on the cable or satellite
box.
Note
When you connect the audio using the PC IN AUDIO
jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 21.
Side of TV
U S B
/
AU DIO O U T
C OMPONE NT
IN
P
R
R
AUDIO P
B
L
AV IN Y
DIG ITA L V IDE O
O U T P U T
( C O AXIAL )
AUDIO
P C IN
VGA
H DMI 3
H DMI 2
( AR C )
H DMI 1
( DV I)
AN T /
C AB L E I N
www.insigniaproducts.com
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y/P
video jacks on the side of your TV and the
component video out jacks on the cable or
satellite box.
Cables are often
color-coded to match
color-coded jacks.
Cable or satellite box
4 Connect an audio cable (not provided) to the
L/R AUDIO jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV
box.
Note
• The COMPONENT IN video jacks share the
audio jacks with the AV IN VIDEO jack.
• When you connect the audio using the L/R
AUDIO jacks, the audio output is analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 21.
/P
B R
U S B
/
AU DIO O U T
C OMPONE NT
IN
P
R
R
AUDIO P
B
L
AV IN Y
DIG ITA L V IDE O
O U T P U T
( C O AXIAL )
AUDIO
P C IN
VGA
H DMI 3
H DMI 2
( AR C )
H DMI 1
( DV I)
AN T /
C AB L E I N
Side of TV
11