Selecting A Tuner Input; Scanning For Channels; Adding New Channels - Vizio E500i-B1E User Manual

Selecting a Tuner Input

Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the Tuner menu, highlight Tuner Mode and press OK.
The Tuner Mode menu displays.
2. Highlight Antenna or Cable and press OK. Press EXIT.

Scanning for Channels

Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
To perform an Auto Channel Scan:
1. From the Tuner Settings menu,
highlight Auto Channel
Scan, and press OK. The auto
channel scan begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,the
channels that were
discovered are retained. A new
channel scan will clear all channels.
VIZIO
CHANNEL SCAN
Channels Found
Digital: 0
Analog: 19
18% Complete
Cancel
already
Cancel the channel scan

Adding New Channels

Occasionally, you may need to add a new analog channel or
add a new range of channels. You can do this by using the Partial
Channel Search and Add Analog Channel options.
To add a range of new channels:
1. From the Tuner menu, highlight Partial Channel Search, and
press OK. The Partial Channel Search menu is displayed.
2. Highlight Scan Mode and select the type of channel you
are adding: Analog, Digital, or Analog Digital.
3. Highlight From Channel and enter the channel from which
you want to begin the scan. (Use the Number Pad on the
remote to enter the channel.)
4. Highlight To Channel and enter the channel to which you
want to end the scan. (Use the Number Pad on the remote
to enter the channel.)
5. Highlight Start and press OK. The partial channel search
begins.
Wide Zoom Normal Panoramic
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote. Exit 2D 3D
ABC
Input Wide CC
Sleep
Picture Audio
Timer
Network Settings Help
29
5