Dvd; Dvd Setting; Dvd Language Setting; Dvd Audio Setting - Magnavox 28MD403V Owner's Manual

7 DVD

DVD SETTING

Settings are only effective when the unit is in DVD mode and any
discs should not be playing back.
1
In Stop mode, press DVD SETUP and use
setting and an item, then press OK to determine the setting.
LANGUAGE
SETUP MENU
AUDIO
SUBTITLE
DISC MENU
OK
2
When the setting is completed, press DVD SETUP to exit.

DVD Language Setting

You can change the Desired Language when playing back the disc.
1
In Stop mode, press DVD SETUP and use
LANGUAGE.
2
Use to select the item you want to adjust, then press OK.
3
Adjust the following items.
SETUP MENU
Select the desired On-screen Language.
AUDIO *1, *2
Select the desired Audio Language.
SUBTITLE *1, *2
Select the desired Subtitle Language.
DISC MENU *1
Select the Desired Language in DVD Menu.
Note(s)
*1
• Language options are not available with some discs.
• If OTHER is selected in AUDIO, SUBTITLE or DISC MENU menu, press 4-digit
number to enter the code for the Desired Language. Language Code List ➟ p.34
• Only the Languages supported by the disc can be selected.
*2
• Language setting for Audio and Subtitle are not available with some discs.
– Use MODE to select Subtitles available on the DVD.
– Use SAP / AUDIO to select Audio available on the DVD.
• If the DVD's default settings for Audio and Subtitle are the same Language, the Subtitles
may not show unless you turn them on.
to select a desired
ENGLISH
ORIGINAL
OFF
ENGLISH
to select

DVD Audio Setting

Choose the appropriate Audio Settings for your equipment. It only
affects the Audio during the Playback on a DVD.
1
In Stop mode, press DVD SETUP and use
2
to select the desired item, then press OK.
Use
SOUND
DRC
DOWN SAMPLING
DOLBY DIGITAL
OK
3
Adjust the following items.
DRC (dynamic range control)
This function is available only on the discs which are recorded in the
Dolby Digital format.
ON Compress the range between soft and loud sounds.
OFF
No effects (original sound).
DOWN SAMPLING
This function is available only on digital outputting of a disc recorded in
96 kHz.
ON When outputting in 48 kHz.
OFF When outputting the original 96 kHz sound.
DOLBY DIGITAL
Set to MULTICHANNEL when this unit is connected to a Dolby Digital
decoder.
MULTICHANNEL
Outputs Dolby Digital signals.
PCM Converts the Dolby Digital into PCM. (2 channel)
32
English
to select SOUND.
ON
ON
MULTICHANNEL
Continued on next page.