Garmin 605 Quick Reference Manual page 9

GSC 10
Pedal magnet
not enough room between the
sensor arm and the spoke. The
magnet must be aligned with
the sensor arm indication line.
4. Loosen the screw on the sensor
arm and move it to within 5 mm of
the spoke magnet. You can also
tilt the GSC 10 closer to either
magnet for improved alignment.
5. Press the Reset
GSC 10. The LED turns red,
GSC 10 and magnet alignment
button on the
Spoke magnet
Sensor arm
indication line
then green. Pedal to test the
sensor alignment. The red LED
blinks each time the crank arm
passes the sensor, and the green
LED blinks each time the wheel
magnet passes the sensor arm.
note: The LED blinks
for the first 60 passes after
a reset. Press
if you require additional
passes.
reset
again