Reviewing An Image Right After Shooting; Selecting A Shooting Mode - Canon Digital IXUS 900 TI User Manual

2. Press the shutter button fully to
shoot.
The shutter sound will play and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is dis-
played in the LCD monitor.
To stop displaying the image, press the shutter button halfway.

Selecting a Shooting Mode

1.
Turn the mode dial to the desired mode (
In the ,
( ) and use the
then press the FUNC./SET button (
See Indicators
See the Advanced Guide for the various shooting methods
available.
See the Advanced Guide: Review (p. 24).
See the Advanced Guide: Checking for Focus Right After
Shooting (p. 67).
See Erasing (p.
and modes, press the FUNC./SET button
or button to select a shooting mode (
(p. 5).
19).
).
).
),
11