Mounting Your Nüvi - Garmin 350 Quick Reference Manual

WARNING: See the Important Safety and Product Information guide in the product box
for product warnings and other important information.
Check your state and local traffic laws before mounting. Currently, state laws in California
and Minnesota prohibit drivers from using suction mounts on their windshields while
operating motor vehicles. Other Garmin dashboard or friction mounting options should be
used. See the Important Safety and Product Information guide for more details.
Mounting Your nüvi
For a tight grip, clean and dry your windshield before
mounting the suction cup.
1. Plug the power cable into the back of the cradle.
2. Snap the cradle onto the suction cup arm.
3. Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Flip up the GPS antenna, and then fit the bottom
of your nüvi into the cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the power cable into a power receptacle
in your vehicle. Your unit should turn on
automatically if it is plugged in and your vehicle
is running.
➊
➋
➎

Windshield
➍
➏
➌