Table of Contents
Advertisement
Watching TV
Antenna / Cable service without a box
Initial setting
1. Connect
coax
Connect
a COAX wire from either an antenna
or Basic Cable service to the
TV's "ANTENNA/CABLE
IN" screw terminal.
TV (ANTENNA/CABLE
IN)
Antenna
2. Scan the channel
I MENU]
-_
>:
: : >
: : >
1. Select either Cable or Antenna
programming
source in
2. Select
and then the appropriate
scan mode:
(
/
/
;
_).
3. Start scanning.
If no channels
are found by the end of the scan, then check the
following:
Antenna's
position - or availability
of Cable service.
Cable, Satellite or Fiber services
with a box are typically connected
to
the TV's AN inputs, preferably
HDMI, for best HD picture. In such a
case, the channel scanning
is not needed.
15
(0100301)
Advertisement
Table of Contents
