Related Manuals for KINGDOM DVD Duplicator - DVD Duplicator built-in 20X Burner
Summary of Contents for KINGDOM DVD Duplicator - DVD Duplicator built-in 20X Burner
- Page 1 DVD Duplicator User’s Guide _____________________________________________________________________________________________ ©2005 Kingdom, Inc. All rights reserved Ver: 1.0...
-
Page 2: Safety Precautions
DVD Duplicator Series This optical duplication device is to be used exclusively for the purpose of copying personal audio and data. This optical duplication device is sold and intended strictly for the purposes of legal copying. It is a violation of International Copyright Laws to use for any other purpose and subject to criminal charges. -
Page 3: Table Of Contents
DVD Duplicator Series TABLE OF CONTENTS SAFETY PRECAUTIONS ......................1 CHAPTER 1 INTRODUCTION....................4 DVD D ................. 4 NTRODUCING THE UPLICATOR YSTEMS ..........................4 EATURES ......................4 YSTEM PECIFICATION ..................5 NPACKING UPLICATOR ....................6 LEANING AND AINTENANCE ......................6 ERFORMANCE ...................... - Page 4 DVD Duplicator Series ..................23 ELECTING A RIVE ARTITION ................... 23 ELECTING THE MAGE OURCE RIVE CHAPTER 6 EDITING TRACKS WHEN USING CDS (FOR CD ONLY) ......24 ..........................24 VERVIEW CD ..............24 OPYING RACKS ASTER ARGET ...................... 24 LAYING AN UDIO RACK...
-
Page 5: Chapter 1 Introduction
DVD Duplicator Series Chapter 1 Introduction Introducing the DVD Duplicator Systems This Kingdom One touch™ is a high speed, multi copy DVD Recordable duplication system, enabling you to copy DVDs up to 16X speed. It provides efficient duplication of compact disk with excellent accuracy. With its professional design and multi-function LCD panel, the unit is particularly easy to operate. -
Page 6: Unpacking Your New Duplicator
DVD Duplicator Series (CLV), DVD-R DL Write Speeds 4x, 2x (CLV). Read Speeds: CD Read Speeds 48x Max (CD-ROM/CD-R), 32x Max (CD-RW), DAE Speeds 32x Max DVD Read Speeds 16x Max (DVD-ROM Single Layer), 7 Max (DVD-ROM Dual Layer), 16x Max (DVD±R), 8x Max (DVD±RW), 5x Max (DVD+R DL), 5x Max (DVD-Video). -
Page 7: Cleaning And Maintenance
DVD Duplicator Series Cleaning and Maintenance The best maintenance for your system is preventive maintenance. Using a system in an area with excessive dust, smoke or other contaminants is not recommended because it will increase error rates and reduce hardware life expectancy. Some light exterior cleaning can be performed, but there is no substitute for a clean environment. -
Page 8: Technical Support
DVD Duplicator Series Technical Support For detailed technical support or questions regarding the DVD Duplicator, contact Kingdom Technical Support at 1-800-296-2312. Note: This duplicator has a serial number located on the rear panel. Please record the Model Number and Serial Number and retain them for your records. It will be necessary to provide this information to Technical Support personnel in order for them to provide you with the best technical support possible. -
Page 9: Chapter 2 Getting Started
DVD Duplicator Series Chapter 2 Getting Started Turning on the System Plug the AC cord into the system and then into a wall outlet. NOTE: Make sure that the voltage setting is correct (115v or 230v). Switch the ON/OFF rocker-switch located on the back of the system (below the power outlet). -
Page 10: Chapter 3 Simple Basics
DVD Duplicator Series Chapter 3 Simple Basics Overview This chapter covers procedures for the most frequently used functions of the DVD Duplicator, which are as follows: Duplicating (Copying) a DVD • Copying a DVD to the Hard Drive • Duplicating from the Hard Drive •... -
Page 11: Loading Advd Onto The Hard Drive
DVD Duplicator Series 4. Press the ENT button. The system will begin by copying information from the master DVD to the DVDs in the slave drives. Red lights on the slave drives indicate when information is being written to the discs in those drives. The master drive flashes a green light, indicating that it is reading and copying the information. - Page 12 DVD Duplicator Series 3. Use the down arrow button to display the 9. Image function. Press the ENT button to select the Image function. Note that the LCD panel display shows which partition of the hard drive the DVDs contents (Image) will be load into. (To learn more about how to select a particular partition on the hard drive, see page 16).
-
Page 13: Copying From A Partition On The Hard Drive
DVD Duplicator Series 6. Press the ESC button two times to return to the numbered functions list. Use the up and down arrow buttons to set the display to 1. Copy. Copying from a Partition on the Hard Drive This procedure applies only to systems that have a hard drive installed. It explains how to copy a DVD that has been loaded onto a partition on the hard drive to blank DVDs in all of the available DVD-RW drives in the system. - Page 14 DVD Duplicator Series 5. Then press the ESC button to return to the list of functions and use the up and down arrow keys to redisplay the 1. Copy function. Note that the Copy function now indicates the hard disc is the source of data. In the following example, the hard disk partition that is the “source”...
-
Page 15: Selecting The Source To Copy From (Dvd-Rw Or Hard Drive)
DVD Duplicator Series Selecting the Source to Copy From (DVD-RW or Hard Drive) This procedure explains how to change the source drive. The top drive is the default drive when shipped. 1. Turn on the system. Note that the Copy command is displayed. Your LCD display should look like the example on the left if your last operation involved duplicating from a Master DVD. - Page 16 DVD Duplicator Series To select one of the DVD-RW drives as the source, press the down arrow button to cycle through the available source drives: 4. Press the ENT button to make your selection. The LCD panel displays a confirmation of your selection.
-
Page 17: Selecting A Specific Hard Drive Partition As The Source
DVD Duplicator Series Selecting a Specific Hard Drive Partition as the Source This procedure explains how to select a specific partition on the hard drive as the source from which you will be copying. 1. Turn on the system. Note that the Copy function is displayed. If your last operation involved duplicating from a Master CD in the CD-ROM drive, then the Copy function appears as follows on the left. - Page 18 DVD Duplicator Series Press the ENT button to select this option, and use the down arrow button to display the letter of the partition in the hard drive that you wish to use as the source. For example: Press the ENT button to select the displayed partition. The LCD panel will confirm your selection.
-
Page 19: Chapter 4 Advanced Functions
DVD Duplicator Series Chapter 4 Advanced Functions Testing (Simulating) the Copy Process The 2.Test function is used to simulate the copying process. When the simulation (test) finishes, no data will be written to the DVD. How to use the 2.Test function: 1. -
Page 20: Comparing The Source And Target After Copying
DVD Duplicator Series (slave, destination) DVD. You can use the 1.Copy function or the 3.Test and Copy function to do this. When the copy process is done, the system will automatically eject the duplicated disc(s). Press the ESC button to redisplay the function and re-insert the disc(s) 2. -
Page 21: Viewing The Disc Info Of The Master (Source) Dvd
DVD Duplicator Series LCD panel. If the Master DVD can not be read correctly, then the message “Prescan Fail!” will appear in the LCD panel. 4. Press the ESC button to redisplay the function. Viewing the Disc Info of the Master (Source) DVD The 7.Disc Info function shows the following information about the Master DVD: Disc Type (e.g., DVD-R) •... -
Page 22: Chapter 5 Using The Hard Drive Partition As The Source
DVD Duplicator Series Chapter 5 Using the Hard Drive Partition as the Source Overview This chapter pertains to systems that contain a hard drive. For systems that have a hard drive, the user can do the following: Load a DVD into a specific partition of the hard drive (9-01.Image Load) •... -
Page 23: Loading Advd (Image ) Into A Partition Of The Hard Drive
DVD Duplicator Series Loading a DVD (Image) into a Partition of the Hard Drive The 9-01 Image Load option is used to load the data from a Master DVD to a partition on the hard drive. This function is valid when a hard drive is installed in the duplicator. Otherwise, this function will show “No HDD”... -
Page 24: Compare The Partition To The Dvd
DVD Duplicator Series 2. Press the ENT or the ESC button to exit this option. Compare the partition to the DVD The 9-04 Image, Compare Image option is used to compare this image (data) of the target and the current working partition on the hard drive. How to use the 9-04 Image, Compare Image option: Use the down arrow button to scroll to the 9. -
Page 25: Chapter 6 Editing Tracks When Using Cds (For Cd Only)
DVD Duplicator Series Chapter 6 Editing Tracks When Using CDs (for CD only) Overview In chapter 3 you learned how to copy a master DVD to a particular partition on the hard drive. In this chapter you will learn how to use the following additional Edit Track options: Copy a track from a Master CD to a target CD (10-01.Edit Track, CD to CD Edit, •... -
Page 26: Closing A Session
DVD Duplicator Series How to use the 10-03 Edit Track, Play Audio Track option: 1. Place the Master DVD in the DVD-ROM drive. 2. Use the down arrow button to scroll to the 10.Edit Track function. Then press the ENT button to select it. Use the down arrow to display the option: 10-03 Edit Track, Play Audio Track. -
Page 27: Chapter 7 About The Setup Options
DVD Duplicator Series Chapter 7 Setup Options Overview The 11.Setup function contains options that allow the user to change the original default settings. As there are various settings that control the duplicator’s operation, we suggest using the preset default settings for optimal operation. The options are described in this chapter for your reference. -
Page 28: Burn On The Fly
DVD Duplicator Series Burn On the Fly This option controls the writing methods to the DVD. When this setting is ON, the data will direct copy from the source drive to the target drives. When the setting is OFF, the data will load into a particular temporary partition in the hard drive and then the copied data will come from the source partition. -
Page 29: Chapter 8 Troubleshooting
DVD Duplicator Series Chapter 8 Troubleshooting 1. No display on LCD or the unit does not operate when power is on. Please check the power cable and the power supply. • 2. LCD shows the Error message. During the operation like Copy, Test, Compare and Verity, you may press the ESC •... -
Page 30: Appendix 1: Overview Of The Functions
DVD Duplicator Series Appendix 1: Overview of the functions Upon starting the system, you can press the down arrow button to scroll through the available options. The last three options, Image, Edit Track, and Setup have sub-options as listed in the outline below: 1. - Page 31 DVD Duplicator Series 11-12. Burn Mode (1 DAO 2 TAO) 11-13. Display Time (On / Off) 11-14. Button Sound (On / Off) 11-15. Device Info 11-16. System Info 11-17. Quick Erase 11-18. Full Erase 11-19. Auto Close Tray 11-20. Quick Compare (On / Off) 11-21.
-
Page 32: Appendix 2: Lcd Messages
DVD Duplicator Series Appendix 2: LCD Messages General Messages: Message Description Initialize SDRAM Initialize the memory on the system Detect Drives Detect what drives are installed in the system Use Abort! While the function is working, cancel the job Analyzing Analyzing the source disc Source Drive Not Ready Source drive is not ready to read... -
Page 33: Firmware Update Messages
DVD Duplicator Series formatting of hard drive Format HDD OK! Formatting hard drive is complete Image Load OK! The image has been loaded from CD to hard drive Image Load Fail The image failed to load from CD to hard drive HDD too small to handle image The hard drive does not have enough space to store the data image (at least 1 Gbytes) - Page 34 DVD Duplicator Series Flash ROM fail! The flash ROM failed to write ©2005 Kingdom, Inc. All rights reserved Page - 33 of 34 User’s Guide Ver: 1.0...
-
Page 35: Appendix 3 Technical Support Information
DVD Duplicator Series Appendix 3: Technical Support Information Email: ktsupt@kingdominc.com Address: Kingdom Inc P.O. Box 506 719 Lambs Creek Road Mansfield, PA 16933 Telephone: 570-662-7515 Fax: 570-662-3875 Website: www.kingdom.com Note: Before contacting Technical Support please have your Model Number and the Serial Number of your duplicator available for reference.