Table of Contents
Advertisement
4. Press the ENT button. The system will begin by copying information from the master DVD to
the DVDs in the slave drives. Red lights on the slave drives indicate when information is
being written to the discs in those drives. The master drive flashes a green light, indicating
that it is reading and copying the information. In the LCD panel display, the status of the
copy operation is indicated. For example:
5. When the copies are finished, the copy disc drawers will automatically open and the LCD
panel will display the status of the successful duplication process:
6. Remove the duplicated DVD(s) from the drive(s) and close the drive(s) using the open/close
button on the DVD drive.
7. Unless you intend to make more copies of the same master DVD, remove the master DVD
from the Master (source) drive.
8. Press the ESC button to return to the Copy function.
Loading a DVD onto the Hard Drive
This procedure applies only to systems that have a hard drive installed . It explains how to copy
the contents of a DVD onto a partition on the hard drive. Once a DVD is copied to the hard
drive, it is easy to make duplicates using all of the available DVD-RW drives.
1. Turn on the system. Note that the copy command is displayed. Your LCD display should
look like this:
2. Place the DVD to be loaded onto the Hard Drive into the Master Drive (the top drive of your
system).
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
DVD Duplicator Series
Page - 10 of 34
User's Guide
Hide quick links:
Advertisement
Table of Contents
