Intercom Calling - PCS System 24/48 User Manual

Intercom Calling

Description
Intercom Calling is used to converse with other
station users in the system. Stations may be
programmed as Direct Station Select (DSS) button
on your station (see Direct Station Select in this
manual).
Operation
ALL TELEPHONES
1. You may place an intercom call with one of
the following methods:
a. Pick up your handset and dial the station
of the person you wish to reach.
b. Simply dial the station of the person you
wish to reach. This will activate your
speakerphone.
c. If you have a DSS button programmed
with the station of the person you wish to
reach, you may pick up your handset and
press the DSS button, or simply press the
DSS button while the handset is in the
cradle.
note: if you have automatic line select programmed to
access a CO Line when you pick up your handset,
you will need to dial the station or press the DSS button
before you pick up your handset.
DISPLAY TELEPHONES
You will receive one of the following messages
when you attempt to intercom a station:
VOICE CALL 10
STA 10 BUSY
STA 10 DND
OUT OF SERVICE
YOUR NUMBER
30
Connected to Station
Station is Busy
Station is in DND mode
Station does not exist
Station is your own
Features - Intercom Calling