Buick 2014 Verano Infotainment System Manual page 74

Use this command to learn
about how to select a band (AM,
FM, or XM), and how to change
radio stations by speaking
frequency numbers.
Use this command to learn
about how to dial, pair a device,
or delete a device.
Use this command to
learn how to play specific tracks,
artists, albums, devices connected
to the USB port, or to change
sources.
Use this command to
learn about how to turn Verbose on
or off, or set the language.
The following list shows the voice
commands available for the
infotainment system with a brief
description of each. The commands
are listed with the optional words in
parentheses. To use the voice
commands, see the previous
instructions.
Instructs the system to go to the
specific band and the last station.
Instructs the system to go
to the specific station.
Instructs the system
to give the current song or station a
thumbs up in Pandora or Stitcher.
Instructs the
system to give the current song or
station a thumbs down in Pandora
or Stitcher.
Instructs the system to
start a phone call. For example, say
Dial 1 248 123 4567. To call a
phone book contact, say Dial or
Call, say the name and location,
and then say Dial. For example,
say Call John at Home or Call
John at Work. If a number is not
recognized, the first number in the
list will be called.
Instructs the
system to begin pairing a device.
Instructs the system to
dial a phone number one digit at a
time. After saying the digits,
say Dial.
Instructs the system to dial the last
phone number called.
Instructs the system to switch to a
different paired device. The device
must be selected from the screen or
using the MENU/SEL knob.
Instructs the
system to delete a paired device.
Instructs the system to
begin reading text messages from
paired device.
Not all devices support text
messages. Applicable where
equipped.