Table of Contents
Advertisement
Available languages
Available languages
Click
7.
Use the following IP Address
To assign an IP address, enter the following
Default gateway
IP address:
Subnet mask:
Default gateway:
Click
to close the Internet Protocol (TCP/IP) Properties window.
8.
OK
Select
to close the Local Area Connection Properties window.
9.
OK
It may take several seconds for this window to close.
Note:
Prepare Your Router for Firmware Recovery–Windows 2000
Using the tip of a paperclip, press and hold the
1.
simultaneously plugging in the power supply via the power adapter receptor.
IP addresses:
192.168.0.2
255.255.255.0
192.168.0.1
Receptor for Power
RESET Button
.
,
IP address
Subnet mask
RESET
LAN Ports
7
, and
button, while
Advertisement
Table of Contents
