Auxiliary Dc Jack - Yamaha YFM660FS Owner's Manual

EBU01002

Auxiliary DC jack

The auxiliary DC jack is located at the front
right side of the ATV.
The auxiliary DC jack can be used for suitable
work lights, radios, etc.
The auxiliary DC jack should only be used
when the engine is running.
1. Auxiliary DC jack cap
1. Set the light switch to "OFF".
2. Start the engine. (See pages 6-1–6-3.)
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
1. Auxiliary DC jack
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
4-24