TERK Technologies XMDALP100 Installation Manual

Smart digital adapter

Advertisement

Limited Warranty

TERK Technologies Corp. (TERK) warrants this product against defects
in materials or workmanship for one (1) year from the date of purchase.
During this warranty period, this product will be replaced without charge.
This warranty does not cover any damage due to acts of nature, commercial
use, accident, misuse, abuse or negligence. This warranty is only valid in the
USA. Replacement as provided under this warranty is the exclusive remedy
of the consumer. TERK shall not be liable for any incidental or consequential
damages for breach of any express or implied warranty on this product,
except to the extent that limitations of this sort are prohibited by applicable
law. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURCHASE EXCEPT TO THE EXTENT THAT
IMPLIED WARRANTIES OF EITHER SORT ARE REQUIRED BY APPLICABLE
LAW, AND IN SUCH CASE, EACH WARRANTY IS LIMITED IN DURATION TO
ONE YEAR.
For additional information: call 1.800.942.TERK (8375)
or visit www.terk.com.
For more information about XM Satellite Radio service, visit www.xmradio.com or call
1-800-852-9636.
The XM name and related logos are trademarks of XM Satellite Radio Inc.
TERK is a registered trademark. The TERK logo is a trademark of the TERK Technologies Corp
405P006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XMDALP100 and is the answer not in the manual?

Questions and answers

Summary of Contents for TERK Technologies XMDALP100

  • Page 1: Limited Warranty

    For more information about XM Satellite Radio service, visit www.xmradio.com or call 1-800-852-9636. 405P006 The XM name and related logos are trademarks of XM Satellite Radio Inc. TERK is a registered trademark. The TERK logo is a trademark of the TERK Technologies Corp...
  • Page 2 SMART DIGITAL ADAPTER Installation Guide XMDALP100 Smart Digital Adapter for Alpine Car Stereos...
  • Page 3 For a complete compatibility list go online to TERK.com/XMDirect The XMDALP100 is easy to install plugging directly into the XMD1000 and the Alpine car stereo head unit*. No splicing or cutting of existing wiring within the vehicle is required. The...
  • Page 4: Installation Overview

    Installation Planning:: The XMDALP100 should be located within 2-3 feet of the XMD1000 due to the cable lengths. The antenna should be located in an area to insure the cable will reach the tuner location. Check this prior to installation.
  • Page 5 Alpine smart digital adapter as shown in Fig 2. Fig 2 Note: Make sure all cables are connected securely. Step 3 Connect the remaining cable with the white rectangle connector into the bottom of the XMDALP100 as shown in Fig 2.
  • Page 6 If not, check to make sure all connections are correct or refer to the trouble shooting section of this installation guide. Step 6 Mount and secure the XMDALP100 in a suitable location that will not interfere with the radio and will not vibrate or rattle after installation.
  • Page 7 Installation (continued) Step 7 Return the Alpine car stereo head unit back to its original location in the dash board, be careful with cables that you just installed so that they do not unplug or get kinked by the head unit. Note: If you had removed screws to pull the Alpine car stereo head unit out please screw those back in.
  • Page 8: Troubleshooting

    Troubleshooting ANTENNA The XM antenna is not connected to the XM tuner. • Check whether the XM antenna cable is attached securely. UPDATING Radio is being updated with latest encryption code. • Wait until encryption code has updated. Channels 0 and 1 should function normally.

Table of Contents