Canon PowerShot A2600 Silver Extended User Manual page 192

ç Contents
A2600
[h] flashes on the screen when the shutter button is pressed,
and shooting is not possible
A1400
[Charging the flash] is displayed when the shutter button is
pressed, and shooting is not possible
[ ] is displayed when the shutter button is pressed halfway
(= 74).
• Set the flash mode to [h]
• Increase the ISO speed
Shots are out of focus.
•
Press the shutter button halfway to focus on subjects before pressing it all
the way down to shoot
• Make sure subjects are within focusing range
• Set [Lamp Setting] to [On]
• Confirm that unneeded functions such as macro are deactivated.
• Try shooting with focus lock or AF lock
No AF frames are displayed and the camera does not focus
when the shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before you
press the shutter button halfway. Otherwise, try pressing the shutter button
halfway repeatedly.
Subjects in shots look too dark.
•
Set the flash mode to [h]
•
Adjust brightness by using exposure compensation
•
Adjust contrast by using i-Contrast
•
Use AE lock or spot metering
(= 64).
(= 114).
(= 101).
(= 50).
(= 81).
(=
(= 114).
(= 102, 143).
(= 99).
ç Chapter Contents
(= 64).
(= 219).
110, 113).
(= 98).
192