Primera Business Card Adapter Kit Installation & Use

This sheet describes the installation and use of the CD-R Business Card
Adapter Kit for the Disc Publisher Pro and the AutoPrinter Pro (referred
to hereafter as the "Publisher").
NOTE: You will need to download and install the updated printer
driver if you have a version lower than 1.03.
• To find your driver
version, go to Start -
Control Panel - Printers
and Faxes - Right Click
on Disc Publisher Pro -
Choose Printing
Preferences - Right Click
on Disc Publisher Pro
Settings - Choose About... The version below the line should read
1.03 or higher. If it does not, perform the upgrade.
• To install the driver, first download it from our web site:
http://www.primera.com/primera_printer_drivers.html. Refer to
the installation instructions included with the driver file.
SECTION I: INSTALLATION
1. Make sure that in this box you have the following items:
• CD Business Card/ Mini CD 80mm Input Bin
• "Hockey Rink" Card Input Bin
• Two Ouput Rings
Three Printer Tray Templates
•
• Sample Discs
2. Remove original 120mm Input Bin and place the appropriate
Card/Mini Disc Input Bin on the right side of the Publisher with
the opening in the bin to the rear. If the opening in the bin is not
toward the rear, the Robotic Disc Transporter will not be able to
pick from the bin.
CD Business
Card/Mini CD
Input Bin
Figure 1: Input Bins
Rear Opening for Arm
"Hockey Rink"
Card Input Bin
3. Place Output Rings in the center of the Output Bin on the left
side of the Publisher as shown in Figure 3.
4. With the Front Cover of the Publisher closed, press the Cartridge
Button. The Printer Tray will open. Open the Front Cover and
install the appropriate Printer Tray Template in the Printer Tray as
shown in Figure 3. The front of the Template has molded tabs that
fit into locating slots found toward the front of the Printer Tray.
When properly installed, the metal clamp moves forward to hold
the card in place as the Printer Tray retracts into the printer.
"Hockey Rink"
Figure 2: Printer Tray Templates
Front Cover
Output Rings
Printer Tray
Template
Figure 3: Adapter Kit
Mini Disc
Business Card
Cartridge
Button
Input Bin