Insignia NS-14T002 Quick Setup Manual

8" TABLET with Android
NS-14T002
QUICK SETUP GUIDE
WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online. To find
your manual, touch the ? icon on your
tablet. You can also go to
www.insigniaproducts.com,
touch Support & Service, enter your
model number in the box under
Manual, Firmware,
Drivers & Product
Information,
then touch ►.
Before using your new product, please read these
instructions to prevent any damage.
In the box
• Insignia Flex™ Android Tablet • USB power adapter
• Micro USB cable • Quick Setup Guide
• Important Information
Features
Camera
/POWER/RESET button Volume +/– button
Assembled in China Model NS-14T002
FCC ID:XXXXXXXXXX IC:XXXXXXXXXX
Microphone
Micro USB port
microSD™
Headphone jack
card slot
Charging the battery
Before using your tablet for the first time, you need to charge the battery for a minimum of
eight hours.
1 Insert the micro USB connector on the Micro USB cable into your tablet's micro USB port.
2 Insert the other end of the micro USB cable into the USB power adapter (wall charger),
then plug the USB power adapter into a power outlet to start charging the battery. When
fully charged, your tablet's battery provides eight hours of continuous video playback
(Wi-Fi turned off) or ten hours of continuous Web browsing.
Speakers
Reset
Turning on your tablet
Press and hold the (power) button on the top, right side of your tablet.

Setting up your tablet

When you turn on your tablet for the
first time, the Welcome screen appears.
Follow the instructions displayed on
your tablet to complete set up.
Connecting to a Wi-Fi access point
To use the Wi-Fi feature, you need access to a wireless access point or hotspot.
1 Touch the settings icon.
2 Touch the Wi-Fi to access the
list of available networks
3 Select the Wi-Fi network you
want to connect to.
4 If you are prompted to enter a
password, touch the keys on the
on-screen keyboard to enter the
password, then touch Done.
5 Touch Connect to connect to
the wireless access point. If the
connection is successful, the
connected icon appears.