Sony LMD-1510W Brochure page 25

Mounting Flexibility and
Remote Access
Mountable in an EIA 19-inch Standard Rack
LMD-30/10 Series monitors can be mounted in a EIA 19-inch
standard rack using optional mounting brackets. The 7U-high
LMD-1530W uses the MB-533 and LMD-1510W uses MB-535
respectively. The 9U-high LMD-2110W uses MB-529 Mounting
Bracket.
VESA mounting
VESA standard mounting holes (100 x 100 mm pitch) are
provided on LMD-30/10 Series monitors to enable wall or
ceiling installation.
Parallel remote control
These entry-level type LMD-30/10 Series monitors can be
controlled remotely via their parallel remote connectors. In
the remote menu, there are 16 functions for the LMD-1530W
and LMD-2110W, and 21 functions for the LMD-1510W, of which
seven can be allocated to the remote connector.
Control panel
LMD-1530W / LMD-2110W / LMD-1510W
1
14
13 12 11 10 9
Tally lamp
1 8
standby swich and indicator
2 9
KEY INHIBIT indicator
3 10
VOLUME buttons
4 11
Menu operation buttons
5 12
ASPECT select button
6 13
SCAN select button
7 14
Connector panel
LMD-1530W / LMD-2110W / LMD-1510W
9 8 7 6
HDMI IN connector
1
HDMI cable holder
2
OPTION In connector
3
OPTION AUDIO In (Phono jack)
4
EXT SYNC In/Out (external sync) (BNC)
5
RGB/COMPONENT (BNC), Audio (Phono jack)
6
PARALLEL REMOTE (modular connector)
7
LINE [composite (BNC), Y/C (Mini DIN 4-pin),
8
Audio (Phono jack)]
AC In
9
8 7 6 5 4 3 2
BLUE ONLY button
EXT SYNC (external sync) button
SDI button
RGB/COMPONENT button
HDMI button
LINE
Speaker
5 4 3 2 1
Input Versatility
Standard inputs and expandability
LMD-30/10 Series monitors are equipped with a full range of
analog SD inputs including analog composite NTSC and PAL,
Y/C (S-Video), and 525i/625i component and RGB. These
monitors can also handle HD/SD-SDI input with an optional
BKM-341HS HD/SD-SDI input adaptor. This optional feature
allows this monitor to connect to HD/SD-SDI equipment for
wide range of broadcast and post-production applications.
Furthermore, these monitors offer an HD signal input
capability via their HDMI and analog component interface,
and also can accept DVI signals via the HDMI interface.*
* Requires a DVI conversion cable.
LMD-30/10 Series
LMD-30/10 Series with
the optional BKM-341HS
HD/SD-SDI adaptor
LMD-1510W
LMD-1510W
25