Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Pittsburgh Automotive Pittsburgh Automotive 2WD and 4WD Ball Joint Service Kit
- Page 2 This enables information. If unreadable or missing, contact better control in unexpected situations. Harbor Freight Tools for a replacement. 6. Dress properly. Do not wear loose clothing or 13. This product contains or, when used, produces a jewelry.
- Page 3 16. Do not allow any lubricants to make contact 18. Read and understand all instructions and safety between any part of the Ball Joint Kit and the precautions as outlined in the manufacturer’s manual part being pressed. Lubricants of any type on for the vehicle you are servicing.
- Page 4 To Install a Ball Joint Ball Joint 1. Clean the vehicle’s control arm, and coat the inside Press (1) diameter of the control arm with a light lubricant. Install 2. Insert the replacement ball joint as straight Adapter (6) as possible into the vehicle’s control arm. 3.
- Page 5 To Disassemble / Assemble a “U” Joint Jackscrew 1. To disassemble a “U” joint, remove any external and/or internal lock rings. 2. Position the Ball Joint Press around the drive shaft yoke and tighten the Jackscrew until the Ball Joint first bearing is removed.
- Page 6 Cleaning, Maintenance, and Lubrication Do not perform any inspection, maintenance or cleaning procedures with the Ball Joint Kit is under a load. 1. BEFORE EACH USE, inspect the general condition 2. PERIODICALLY, use a premium quality of the Ball Joint Kit. Check for misalignment and light weight machine oil to lubricate or binding of moving parts, cracked or broken the threads of the Jackscrew.
- Page 7 Parts List & Assembly Diagram Part Description Part Description Ball Joint Press Remove Adapter (1.148” L x 1/2” I.D. x 3” O.D.) Jackscrew Installing Cup Receiving Tube (3.676” L x 1-3/4” I.D. x 2” O.D.) (2-1/4” L x 2.723” I.D. x 3” O.D.) Receiving Cup Receiving Tube (2-1/2”...
- Page 8 3491 Mission Oaks Blvd., ● P. O. Box 6009 ● Camarillo, CA 93011 ● (800) 444-3353...
Need help?
Do you have a question about the Pittsburgh Automotive 2WD and 4WD Ball Joint Service Kit and is the answer not in the manual?
Questions and answers