Specifications; Components And Controls; Setup And Operation - Harbor Freight Tools Four Post Boot & Glove Dryer 67326 Set Up And Operating Instructions Manual

sPeciFications

Electrical Requirements
Settings
HouseHolD use only
unPackinG
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
comPonents & controls
Wind Tube (17)
Control Knob (13)
Heat Switch (14)
Figure 1
SKU 67326 For technical questions, please call 1-800-444-3353.
120 V~ / 60 Hz / 230 W
with heat, 30 W without
heat
Rocker Switch:
No Heat / Heat
Timer Switch:
Off, variable to 3
hours, with 10 minute
increments, up to 180
minutes
e224797
Long Tube (2)
Toe Support (3)
Short Tube (1)
(Inside Long Tube)
Control
Knob
(13)
Heat
Switch
(14)
Figure 2
set uP & oPeration
read the entire rules For
saFe oPeration section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
From acciDental
oPeration or electric
sHock:
Before assembly, cleaning or
adjustment, make sure the
cord is unplugged, and the
unit has cooled.
note: For additional information regarding
parts listed, refer to Assembly
Diagram at back of manual.
This dryer is for drying socks, gloves
and mittens as well as footwear and
boots.
to Prevent
serious injury
Page 4