Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U Serial number...
Basic operations ..........5 relevant Instruction manual which can be Playing music (CD/USB/iPod)......6 downloaded at http://manual.kenwood. Listening to the com/edition/im344. PANDORA® Internet radio ......7 To refer to Instruction manual, a PC loaded with Microsoft®...
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they can work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed.
Turn off the Demonstration mode when faceplate you use the unit for the first time after installation. (KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U only) Press the Control knob to quit the Demonstration mode when the message “To cancel DEMO Press the volume knob”...
Display selection Bluetooth audio (Function of “BT AUDIO” Pressing the [DISP] button repeatedly KDC-X896/ KDC-BT852HD) switches among 5 (KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U)/ 4 USB or iPod “USB” or “iPod” (KMR-550U) types of display. PANDORA® Internet radio (Function “Pandora” You can select the information to be of iPhone®)
Playing music (CD/USB/iPod) [SRC] Control knob Disc slot USB Terminal Playing a disc Music search Insert a disc in the Disc slot. You can search for the song you want to When it is inserted, the source is play. switched automatically and playback Press the [ ] button.
4.0, start the Internet radio application before selecting the PANDORA Internet radio source. Thumbs up Press and hold [PRESET] button. Thumbs down KDC-X896 KDC-BT852HD Press and hold [ ] button. KDC-X496 KDC-452U KMR-550U Press and hold [S.MODE] button. English | 7...
Listening to the radio/HD Radio™ tuner/ SiriusXM™ Satellite Tuner [SRC] [PRESET] Control knob Selecting a tuner source allows you to recall a desired station without switching between bands and/ Press the [SRC] button to select “HD or tuner sources. Maximum of 6 stations RADIO”/ “TUNER”...
Function of KDC-X896, KDC-BT852HD Hands-free phoning Control knob [ ] [ ] Dialing a number in the phone Registering a Bluetooth device You can register your Bluetooth device in book this unit. Dial the phone number in the phone book of your cellphone.
• If you experience any problem during (KDC-X896, KDC-BT852HD only) installation, consult your Kenwood dealer. • Disconnect the battery’s negative terminal before installing the unit..1 (3m) • Insulate unconnected wires with vinyl tape or other similar materials.
Page 11
For Good Reception not connect the - connector to a rear output terminal. To assure good reception, note the • Connect the speaker wires correctly to the following: corresponding terminals. The unit may • Communicate with the cell-phone within be damaged or fail to work if you share the line-of-sight distance of 10 m (30 the - wires or ground them to any metal ft).
Connecting wires to terminals To SiriusXM Connect Vehicle Tuner (optional accessory) KMR-550U only To KCA-RC107MR/ KCA-RC55MR (optional accessory) To connect the KCA- ⁄ RC107MR/ KCA-RC55MR, consult your KCA-RC107MR/ KCA-RC55MR manual. White To front left speaker White/Black ⁄ Gray • Speaker Impedance: 4 – 8 Ω To front right speaker Gray/Black Green...
Page 13
Connect to the terminal that is grounded when the telephone rings or during Brown (Mute control wire) conversation. (This wire functions only for MUTE the KDC-X496, KDC-452U, and KMR-550U.) To connect the Kenwood navigation ⁄ system, consult your navigation Orange/ White manual.
Installing/Removing the unit Non-Japanese cars Removing the hard rubber frame Engage the catch pins on the removal tool and release the two locks on the upper part of frame. Lift up and pull the frame forward as shown in the figure. Catch Bend the tabs of the mounting sleeve Lock...
• iPhone 4S microphone on the place • iPhone 4 shown above. • iPhone 3GS • iPhone 3G • iPhone For information on the compatibility with Turn the microphone iPod/iPhone software, visit www.kenwood. toward the driver. com/cs/ce/ipod/. English | 15...
Pour les Préparatifs ............18 fonctions qui ne sont pas expliquées ici, voir le Mode d'emploi correspondant qui peut être Fonctionnement basique ......19 téléchargé sur http://manual.kenwood.com/ Reproduction de la musique edition/im344. (CD/USB/iPod)..........20 Pour consulter le Mode d'emploi, un PC avec Microsoft®...
Kenwood. Bouton de réinitialisation • Lorsque vous achetez des accessoires en option, vérifiez auprès de votre revendeur Kenwood que ceux-ci fonctionnent avec votre modèle et dans votre région. • Les caractères conformes à l'ISO 8859-1 peuvent être affichés. Français | 17...
Détachement/Remise en place de La première fois que vous utilisez l'appareil la façade après l'avoir installé, vous devez désactiver le mode de démonstration. (KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U uniquement) Pour quitter le mode démonstration, appuyez sur le bouton de commande Appuyez sur la lorsque le message “To cancel DEMO Press...
KDC-BT852HD) 5 (KDC-X896/ KDC-BT852HD/ KDC-X496/ USB ou iPod “USB” ou “iPod” KDC-452U)/ 4 (KMR-550U) types d'affichage. Radio Internet PANDORA® (Fonction “Pandora” Vous pouvez ainsi sélectionner les spécifique des modèles iPhone®) informations à afficher. Reportez-vous à...
Reproduction de la musique (CD/USB/iPod) Fente pour Molette de le disque [SRC] commande Borne USB Écouter un disque en reprendre la lecture. Insérez un disque dans la fente pour le Recherche de morceau disque. Vous pouvez rechercher le morceau que vous Une fois le disque inséré, la source change voulez écouter.
Internet PANDORA. J'aime Appuyez sur la touche [PRESET] et maintenez-la enfoncée. Je n'aime pas KDC-X896 KDC-BT852HD Appuyez sur la touche [ ] et maintenez-la enfoncée. KDC-X496 KDC-452U KMR-550U Appuyez sur la touche [S.MODE] et maintenez-la enfoncée. Français | 21...
Écoute de la radio/du tuner HD Radio™/du tuner SiriusXM™ satellite Molette de [SRC] [PRESET] commande Sélection d'une source radio stations confondues. Ce mode permet d'enregistrer différentes bandes et sources Appuyez sur la touche [SRC] pour radio (Radio, SiriusXM, tuner HD Radio, etc.) sélectionner “HD RADIO”/“TUNER”...
Fonction spécifique aux modèles KDC-X896, KDC-BT852HD Téléphonie mains libres Molette de commande [ ] [ ] chargez-le à partir du téléphone portable.) Enregistrement d'un dispositif Bluetooth Composition d'un numéro du Vous pouvez enregistrer votre périphérique répertoire téléphonique Bluetooth dans cet appareil. Composition d'un numéro de téléphone Appuyez sur la touche [ ] et maintenez-la enregistré...
• Si vous rencontrez des problèmes au cours ..1 (3 m) de l'installation, consultez votre revendeur Kenwood. • Déconnectez la borne négative de la batterie avant d'installer l'appareil. • Isolez les câbles non connectés avec un ruban de vinyle ou un autre matériel similaire.
Page 25
deux bornes de sortie arrière (n'utilisez pas Pour obtenir une bonne réception simultanément la sortie avant et la sortie Pour assurer une bonne réception, veuillez tenir arrière). Par exemple, si vous raccordez le compte des indications suivantes : câble + de l'enceinte de gauche à une • Communiquez avec le téléphone portable borne de sortie avant, ne connectez pas le à...
Connexion des câbles aux bornes Tuner véhicule SiriusXM Connect (accessoire en option) KMR-550U uniquement KCA-RC107MR/ KCA-RC55MR (accessoire en option) Pour connecter le périphérique ⁄ KCA-RC107MR/ KCA-RC55MR, consultez le mode d'emploi KCA-RC107MR/ KCA-RC55MR. Blanc Vers le haut-parleur avant ⁄ Blanc/Noir gauche Gris • Impédance des Vers le haut-parleur avant droit...
Page 27
(Ce câble ne fonctionne que pour le KDC-X496, MUTE KDC-452U et KMR-550U.) Pour effectuer une connexion avec un ⁄ système de navigation Kenwood, consultez Orange/Blanc le manuel de votre système de navigation. (Fil de commande d'atténuation) Vers le commutateur d'éclairage du véhicule...
Installation/Désinstallation de l'appareil Voitures non japonaises Retrait du cadre en caoutchouc dur Insérez les broches de saisie sur l'outil de déblocage et décrochez les deux verrous de la partie supérieure du cadre. Soulevez et poussez le cadre vers l'avant, tel qu'illustré...
• Installez le microphone aussi loin que Un guide en ligne sur les fichiers audio est possible de l'emplacement dédié à votre disponible sur le site à l'adresse suivante : téléphone. www.kenwood.com/cs/ce/audiofile/. Accessoire Modèles d'iPod/iPhone pouvant être connectés à cet appareil Made for • iPod touch (4th generation)
Reproducción de música instrucciones correspondiente disponible en (CD/USB/iPod)..........34 http://manual.kenwood.com/edition/im344. Para consultar el Manual de instrucciones será Escuchar la radio por necesario un PC en el que se haya instalado Internet PANDORA® ........35 Microsoft®...
Botón de reinicio Notas • Si tiene problemas durante la instalación, consulte a su distribuidor Kenwood. • Antes de comprar accesorios opcionales, consulte a su distribuidor Kenwood para asegurarse de que funcionan con su modelo en su área. Español | 31...
Desconecte el modo de demostración placa frontal cuando utilice la unidad por primera vez después de la instalación. (Solo para KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U) Pulse el mando de control para salir del modo de demostración si aparece el Pulse el botón de liberación.
Pulse el botón [DISP] repetidamente para Audio de Bluetooth (función de “BT AUDIO” pasar entre 5 (KDC-X896/ KDC-BT852HD/ KDC-X896/ KDC-BT852HD) KDC-X496/ KDC-452U)/ 4 (KMR-550U) tipos USB o iPod “USB” o “iPod” de visualización. Radio por Internet PANDORA® (función “Pandora” Puede seleccionar la información que del iPhone®)
Reproducción de música (CD/USB/iPod) Mando de Ranura para [SRC] control discos Terminal USB Reproducción de un disco Pausa y reproducción Inserte un disco en la ranura para discos. Pulse el botón [ ] para interrumpir o Una vez introducido el disco, la fuente reanudar la reproducción de una canción cambia automáticamente y comienza la (pista o archivo).
Internet antes de seleccionar la fuente de radio por Internet PANDORA. Pulgares arriba Mantenga pulsado el botón [PRESET]. Pulgares abajo KDC-X896 KDC-BT852HD Pulse y mantenga pulsado el botón KDC-X496 KDC-452U KMR-550U Pulse y mantenga pulsado el botón [S.MODE]. Español | 35...
Escuchar el sintonizador de radio/HD Radio™/ Sintonizador satelital SiriusXM™ Mando de [SRC] control [PRESET] Selección de una fuente del acceder al modo de presintonización de emisoras combinadas. En este modo, sintonizador se pueden guardar diferentes bandas y Pulse el botón [SRC] para seleccionar “HD fuentes del sintonizador (Radio, SiriusXM, RADIO”/ “TUNER”...
Función del KDC-X896 y el KDC-BT852HD Dispositivo manos libres Mando de control [ ] [ ] Marcación de un número de la Registrar un dispositivo Bluetooth Puede registrar su dispositivo Bluetooth agenda telefónica en esta unidad. Marque el número de teléfono de la agenda telefónica de su teléfono móvil.
(Solo KDC-X896, KDC-BT852HD) profesionales. • Si tiene problemas durante la instalación, consulte a su distribuidor Kenwood..1 (3 m) • Desconecte el borne negativo de la batería antes de instalar la unidad.
Page 39
Para una buena recepción el conector + del altavoz izquierdo a un terminal de salida delantero, no conecte Para garantizar una buena recepción, tenga en el conector - del altavoz derecho a un cuenta lo siguiente: terminal de salida trasero. • Comuníquese con el teléfono móvil dentro • Conecte los cables de los altavoces a de la distancia de línea de visibilidad...
Conexión de cables a los terminales Para el sintonizador para vehículo SiriusXM Connect (accesorio opcional) Solo para KMR-550U Para KCA-RC107MR/ KCA-RC55MR (accesorio opcional) ⁄ Para conectar KCA-RC107MR/ KCA-RC55MR, consulte su manual de KCA-RC107MR/ KCA-RC55MR. Blanco Hacia el altavoz delantero ⁄ Blanco/Negro izquierdo Gris...
Page 41
(Este cable solo funciona para el KDC-X496, MUTE KDC-452U y KMR-550U.) ⁄ Para conectar el sistema de navegación Kenwood, consulte su manual de Naranja/blanco navegación. (cable del reductor de luz) A interruptor de control de luces del vehículo ILLUMI...
Montaje y desmontaje de la unidad Automóviles no japoneses Extracción del marco de goma rígida Enganche las uñas de agarre en la herramienta de extracción y quite los dos enganches del nivel superior del marco. Suba el bastidor y tire de él hacia adelante tal como se indica en la imagen.
• iPhone 4 el micrófono en el lugar • iPhone 3GS que se muestra arriba. • iPhone 3G • iPhone Para obtener información sobre la compatibilidad con el software iPod/iPhone, Gire el micrófono hacia el visite www.kenwood.com/cs/ce/ipod/. conductor. Español | 43...
Page 44
The term “IC: ” before the certification/registration JVC KENWOOD Corporation number only signifies that the Industry Canada 2967-3, ISHIKAWA-MACHI, technical specification were met.
Page 45
• The Bluetooth word mark and logos are owned by • Contains Transmitter Module the Bluetooth SIG, Inc. and any use of such marks FCC ID : RKXFC6000S by JVC KENWOOD Corporation is under license. • Contains Transmitter Module Other trademarks and trade names are those of IC: 5119A-FC6000S their respective owners.