Listening Position (Dnn990Hd) - Kenwood DNN990HD Instruction Manual

Return to the Top page
Audio Setting Up
Listening Position
(DNN990HD)
You can adjust the sound effects according
to your listening position.
1
Touch [Position].
Position screen appears.
2
Select listening position from
[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), and [All]
using [C] and [D].
148
Ñ
Position DTA Control
You can fine-adjust your listening position.
1
In Position screen, touch [Adjust].
2
Select the speaker you wish to adjust
by touching speaker icon.
3
Set DTA as follows.
[C], [D]
Adjust the settings of the DTA position.
Gain
Touch to adjust the gain of each speaker.
Initialize
Initializes the setting values.
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Input the differences calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
Example: When [Front All] is selected as the
listening position
+3.4feet
1.6feet
2.5feet
5feet
+2.5feet
+0feet
Return to the Top page
Audio Setting Up
149