Canon WFT-E6 Manual page 14

Connection Wizard
Ad Hoc Connections
Infrastructure Connections
14
Select the channel and then press SET.
Available channels will be different for Ad Hoc
11b/g and 11a connections.
Select the Ad Hoc connection's
encryption method and then press SET.
If you selected [WEP], continue with step 6 below.
If you selected [No encryption], skip to step 7.
Select the Wi-Fi network's
authentication method and then press
SET.
If you selected [Shared Key], skip to step 6.
Select the Wi-Fi network's encryption
method and then press SET.
If the authentication method is [Open], you can
select [WEP] and continue to step 6, or [No
encryption] and skip to step 7.
If the authentication method is [WPA-PSK] or
[WPA2-PSK], you can select [TKIP] or [AES].
Enter the encryption key as described
in the previous section (A 12).
Depending on the settings, you may need to select
the WEP index key first.
Continue with the procedure to
configure the IP address assignment
(A 15).