Table of Contents
Advertisement
Safety Precautions (cont.)
Information
3-12,Moriya-cho, Kanagawa-ku,
Yokohama-shi,
Kanagawa 221-0022, Japan
• The AC power supply is controlled by
turning on/off the POWER switch on the
rear panel. If the product is installed in a
place where you cannot easily turn
on/off the POWER switch, control the
AC power supply by
plugging/unplugging the power cord
into/from the AC outlet. In this case,
install the product as close to the AC
outlet as possible, and leave enough
space for plugging/unplugging the
power cord. If the product is installed in a
place where you cannot easily plug /
unplug the power cord, equip an easily
accessible device to the wiring of the
building for turning on/off the power.
• When the product is left unattended and
unused for a long period of time, unplug
it from the wall outlet and disconnect the
cable system.
• Do not overload wall outlets, extension
cords, or convenience receptacles on
other equipment as this can result in a
risk of fire or electric shock.
• Use only the accessory cord designed
for this product to prevent shock.
Manufacturer
Importer (EU only)
JVC House
JVC Business Park
12 Priestley Way, London NW2 7BA,
United Kingdom
U.S.A. only
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by
JVC could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and. if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that
contains mercury. Disposal of these
materials may be regulated in your
community due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or for USA. the Electronic
Industries Alliance: http://www.eiae.org
- 5 -
Advertisement
Table of Contents
