Mercedes-Benz SLK Operator's Manual page 116

Audio system
114
Tuning to a station via station search
K
( Y page 123)
Fast rewind (
Skipping backwards to a track
( Y page 138)
Tuning to a station via station search
L
( Y page 123)
Fast forward (
Skipping forwards to a track
( Y page 138)
Rejecting a call (
M
Ending an active call (
Confirming a passcode
N
( Y page 150)
Accepting a call (
Initiating a call (
Redial ( Y
Switching sound on/off
O
( Y page 118)
Switching hands-free microphone
on/off (
Sound settings (
P
Audio display
! Avoid touching the audio display at all
times. The display has a very sensitive high-
gloss surface, there is a risk of it being
scratched. Do not press directly in the
display face. Otherwise, the audio display
will be damaged.
i
For information about cleaning and care
of the audio display, see "Audio or
COMAND display" (
Display
The currently selected mode and the
associated menus are shown on the audio
display. The audio display is divided into
several areas.
Y page 138)
Y page 138)
Y
page 158)
Y page 158)
Y page 158)
Y page 156)
page 157)
Y page 158)
Y page 118)
Y page 231).
Example illustration: Radio selected
Status line = displays the current settings
for radio and telephone mode.
You can request the required function using
menu bar :.
The selection is made using buttons
9:;=.
Mobile phone readiness is indicated by
additional information being shown in the
status line:
In the telephone main menu: Name of the
R
®
Bluetooth device (calls made and
received via the Bluetooth
( Y page 151).
Mobile phone network signal strength
R
r. This information will only be shown
with suitable mobile phones.
The receiver symbol indicates whether a
R
call is active or not.
¢ No active call
ö Active call
In this example, the audio main function is set
to the FM radio mode and main area ; is
active.
i The layout of the menus may vary
depending on your vehicle's equipment.
This manual shows the menus for a fully
equipped vehicle.
Instrument cluster multifunction
display
Please refer to the "Control system" section
of this manual ( Y page 93) for function
descriptions and operation of the instrument
cluster multifunction display and
®
interface)