Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LG GA6400
Summary of Contents for LG GA6400
- Page 1 Life's Good LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your retain future reference. GA6400 Series GA6450 Series GA7900 Series www.lg.com P/NO : MFL67468182 (1302-REV01)
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS REMOTE CONTROL Inserting batteries IMPORTANT SAFETY INSTRUCTIONS Registering the remote control How to use the zoom in/out gestures Viewing 3D Imaging Voice Search for Google Precautions to take when using the remote LICENSES control WATCHING... -
Page 3: Important Safety
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your prod uct. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warning£. Follow all instructions. Do not use this apparatus near water. - Page 4 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
- Page 5 If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's Keep the product away from direct sunlight.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six million pixets. In a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixels and do not affect the This equipment has been tested and found to...
-
Page 7: Viewing 3D Imaging
IMPORTANT SAFETY INSTRUCTIONS "7 Viewing Imaging WARNING Viewing Time - When watching 3D content, take 5 - 1 5 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain. Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content. - Page 8 - The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance. Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
-
Page 9: Licenses
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are DOLB¥ DIGITAL PLUS trademarks of Dolby Laboratories. IMIII: N IIII The terms HDMI and HDMI High-Definition... -
Page 10: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. - Page 11 ASSEMBLgNG AND PREPARING Power Cord QWERTY Remote Control, Owner's Manual, Batteries (AA) CD Manual (See p.33) Cinema 3D Glasses Stand Screws Stand Base, Stand Body 8 EA, M4 x 14 (See p.16) (See p.16) Cable Holder Wall Mount Inner Spacers Cable Management 4 EA 2 EA...
- Page 12 ASSEMBLING PREPARING QWERTY Remote Control, Owner's Manual, Power Cord Batteries (AA) CD Manual (See p.33) Cinema 3D Glasses Stand Screws Stand Base, Stand Body 8EA, M4x (See p.17) (See p.17) IR Blaster Cable Cable Holder Cable Management 2 EA (See p.32) (See p.20) (See p.20) Component Video Cable...
-
Page 13: Optional Extras
ASSEMBLING PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer's circumstances or policies. -
Page 14: Parts And Buttons
ASSEMBLING PREPARING Parts Buttons Bu#ons • intelligent sensors(For 55GA79OO) Description (A /V) Scrolls through the saved channels. (+/_) Adjusts the volume level. (OK ®) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus. (INPUT-IE)) Changes the input source. -
Page 15: Lifting And Moving The Tv
ASSEMBLING PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. ,----- CAUTION Avoid touching the screen at all times, as this may result in damage to the screen. -
Page 16: Setting Up Thetv
16 ASSEMBLING AND PREPARING Setting up theTV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching stand If you are not mounting the TV to a wall, use the following instructions... - Page 17 ASSEMBLgNG AND PREPARING Stand body Stand base 4 EA 4x14...
-
Page 18: Mounting On A Table
18 ASSEMBLING AND PREPARING Mounting on a table Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. --ioc_ ___,_-_ ....__ iJ ..Connect the power cord to a wall outlet. -
Page 19: Mounting On A Wall
-- _ CAUTION Disconnect the power before moving or installing An optional wall mount can be used with your LG the TV. Otherwise electric shock may occur. Television. Consult with your local dealer for a wall If you install the TV on a ceiling or slanted waN, it mount that supports the VESA standard used by your may fall and resutt in severe injury. -
Page 20: Tidying Cables
ASSZMBLING PRZPARING Gather and bind the cables with the cable holder. Tidying cables This section uses illustrations of the GA6400 series. Gather the cables with the stand rear cover. Install the cable management as shown. Cable Holder CAUTION Do not move the TV by holding the cable holder... -
Page 21: Making Connections
CONNECTIONS • This section uses illustrations of the GA6400 series, You can connect various external devices to the TV. Supported externat devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information... -
Page 22: Network Connection
Connect the TV to a router with a LAN cable. Or, connect with Wi-Fi by accessing Network Setup in the initial Setup Wizard. For seamless internet streaming LG recommends a stable 4 Mbps broadband speed and 1.5 Mbps as a minimum. -
Page 23: Hdmi Connection
MAKING CONNECTIONS HD receiver Connecting to a Player or VCR Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with an HDMI cable as shown in the following illustration. -
Page 24: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cabte as shown in the following illustration. To transmit an audio signal, connect an audio cable. Choose HDMI/DVI input... -
Page 25: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. r--@ NOTE Connect the mobile phone to the HDMI IN 4 (MHL) port to view the phone screen on the TV. This only works for the MHL-enabled phone. -
Page 26: Component Connection
26 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. if cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. -
Page 27: Composite Connection
MAKING CONNECTIONS 2"7 Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cabte as shown in the following illustration, YELLOW (Use the composite video cable provided.) VCR / DVD/ Blu-Ray / HD Cable... -
Page 28: Connecting A Pc
MAKING CONNECTIONS Connecting -- @ NOTE * it is recommended to use the TV with an HDMi connection for the best image quality.. * Depending on the graphics card, DOS mode video may not work if a HDMi to DVi Cable is in use. * in PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness, if noise is present, change the PC output to another resolution,... - Page 29 MAKING CONNECTIONS Choose any HDMI/DVI input port to connect. It does matter which port use. ('Not Provided iiiiiiiiiiiil iiiiiiiiiiii| _!i_i!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!i!i!i_ili!
-
Page 30: Connecting To An Audio System
30 MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. tf you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. NOTE Digifal Opfical... -
Page 31: Connecting To A Headphone
MAKING CONNECTIONS Connecting to a Headphone Listen to the sound through a headphone. F.-@ NOTE AUDIO menu options are disabied when connecting a headphone. When changing AV MODE with a headphone connected, the change is applied to video but not to audio. * Optical Digital Audio Out is not available when connecting a headphone. -
Page 32: Using Ir Blaster
MAKING CONNECTIONS Using IR Blaster Universal remote control setting enables user to control multiple devices with a single remote controller. In order to continue the setting, please check if IR Blaster and other devices are connected with TV properly. Connect the IR Blaster Cable to the TV. Place the transmitter in front of the Set-top vox. -
Page 33: Remote Control
REMOTE CONTROL REMOTE CONTROL Inserting batteries When you use the remote control for the first time, you should insert the batteries to remote control, 1. Open the battery cover as shown below. 2. Insert the the batteries to the remote control. -
Page 34: Voice
REMOTE CONTROL iNPUT Turn the TV on or off. Selects input list. VOICE HOME Access the homescreen. Searchingby voice. Select item by pushing key. Navigafion Buffons (up/down/bft/right) Wheel Move focus Spin the wheel up/down to scroll up/down. _! GUIDE Moveto previousor superior step. Access the EPG on connected set-top box. - Page 35 REMOTE CONTROL Cancel state or command Moves focus to the next step Shift Combination key for upper letter Back Move to previous or superior step. Delete text Ent"er Finish text input EXT PWR (Fn+Z) Turn on/off external device PWR (Fn+X) Turn on/off amplifier Space ¢,(F.+|)/e,(F.+I)
-
Page 36: Precautions
1 Press and hold the Gesture button for 2 * The TV only supports the included LG QWERTY seconds, remote control, it may be compatible with a keyboard that meets HID specifications. -
Page 37: Watching
WATCHING WATCHING Turning the TV on for first time Select your Audio Set up Audio amplifier amplifier manufacturer. To control your receiver, control When you turn the TV on for the first time, the initial connect the IR blaster. setting screen appears. Select a language and customize the basic settings. -
Page 38: Open Source
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 39: Specifications
SPECW_CAT_ONS SPECIFICATIONS )riot notice due to upgrade of product functions. Product specifications may be changed without AC 100 - 240 V - 50/60 Power requirement NTSC-M, ATSC, 64 & 256 QAM Television System VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 _ram Coverage 75 ©... - Page 40 Range 5150 to 5250 MHz 5725 to 5850 MHz 802.11a: 16.5 dBm Output Power 802.11b: 16 dBm (Maxl) 802.1 lg: 15.5 dBm 802.11n- 2.4GHz: 15.5 dBm 802.11n- 5GHz: 16.5 dBm Because band channel used by the country could be different,...
-
Page 41: Maintenance
MAINTENANCE MAINTENANCE Cleaning Your Clean your TV regularly to keep it at peak the best performance and to extend the product lifespan. F-----_£ CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible... - Page 43 Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE * The home theater entertainment experience is a growing trend larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper...
- Page 44 Life's Good i_,il _%_ _ _C¸_'+_¸ R _ • " EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
- Page 45 KEY CODES KEY CODES This feature is not available for all models. Code Function NOte Code Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button List...
- Page 46 (TV) (PC) LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 47 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type , You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
- Page 48 EXTERNALCONTROLDEVICESETUP Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Communication code : ASCII code Data length : 8 bits Parity : None , Use a crossed (reverse) cable. Command reference list DATA , ;OMMAND1 OMMAND2 ( exaa cm "H -'ei...
- Page 49 EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 50 EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute _- To control Power Off of the set. on, TV will not display OSD.
- Page 51 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
- Page 52 EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
- Page 53 EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
- Page 54 EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...
- Page 55 Life's Good...
- Page 56 Life's Good [:or in%lires or co_r_r visilwww.6g_com call; 1-800-243-0000 USA,Consur_ _us_ www.lg.com model seral rumber located on tie back of the Record t below should you ever need servce MODEL thatcetidexceedtlelh'nts ecessaytoquallyfo SERIAL EN ERG'/STAR...