Power Supply; Voltage And Power Requirements; Power Cord - Sony HDW-1800 Installation Manual

1-4. Power Supply

1-4-1. Voltage and Power Requirements

This unit's power line has a switching regulator.
c
Be sure to operate the unit within the range of following
power voltage.
AC 100 to 240 V ± 10 %
Power voltage:
Power frequency: 50 Hz or 60 Hz
Power consumption: Maximum 170 W
(With all of the presumed optional kits.)
Rush current: 10 A (Power voltage 100 V)
33 A (Power voltage 240 V)
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.
1-2 (E)

1-4-2. Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
Use the specified power cord only when connecting the
AC power. Never use a injured power cord.
For customers in the U.S.A. and Canada:
1 Power cord 125 V 10 A (2.4 m):
2 Plug holder (Brown):
1
For customers in the United Kingdom:
1 Power cord 250 V 10 A (2.0 m):
2 Plug holder (Brown):
1
For customers in European countries except the United
Kingdom:
1 Power cord 250 V 10 A (2.0 m):
2 Plug holder (Brown):
1
For customers in the China:
1 Power cord 250 V 10 A (1.8 m):
2 Plug holder (Brown):
1
If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.
! 1-551-812-31
3-613-640-01
AC inlet
2
! 1-777-823-12
3-613-640-01
AC inlet
2
! 1-551-631-15
3-613-640-01
AC inlet
2
! 1-783-481-42
3-613-640-01
AC inlet
2
HDW-1800/D1800