First Time Settings; Setting The Date And Time - Canon LEGRIA FS405 Instruction Manual

First Time Settings

Setting the Date and Time

You will need to set the date and time of
the camcorder before you can start
using it. The [Date/Time] screen will
appear automatically when the cam-
corder's clock is not set.
When the [Date/Time] screen appears,
the year will be selected.
1 Change (
2 Change the rest of the fields (month, day, hour and minutes) in
the same way.
3 Select ( ) [OK] and press
setup screen.
NOTES
• When you do not use the camcorder for about 3 months, the built-in
rechargeable lithium battery may discharge completely and the date
and time setting may be lost. In such case, recharge the built-in lithium
battery ( 112) and set the time zone, date and time again.
• The date appears in a year-month-day format only in the first setup
screen. In subsequent screen displays the date and time will appear as
day-month-year (for example, [1.Jan.2011 12:00 AM]). You can
change the date format and the clock format (12/24 hours) with the
[Date Format] setting.
• You can also change the date and time later on (not during the initial
setup). Open the [Date/Time] screen from the setup menus:
FUNC.
[
26
Preparations
) the year and move (
Menu]
) to the month.
to start the clock and close the
[Date/Time]