•
Focusing may not be possible in some shooting conditions.
•
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
•
If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
•
AF lock shooting is not available.
[AF-Point Zoom] on the 4 tab is not available.
•
•
Not available when using the self-timer (p. 62).
IXUS 510 HS
Changing the Focus Setting
You can change default camera operation of constantly focusing on subjects
it is aimed at, even when the shutter button is not pressed. Instead, you can
limit camera focusing to the moment you press the shutter button halfway.
Shooting Range and Focusing
Touch H, touch n, choose
[Continuous AF] on the 4 tab, and then
choose [Off] (p. 50).
Helps avoid missing sudden photo
opportunities, because the camera
On
constantly focuses on subjects until you
press the shutter button halfway.
Conserves battery power, because the
Off
camera does not focus constantly.
Still Images
119