Table of Contents
Advertisement
Ⅴ.TECHNICAL SPECS
TFT LCD Screen
Highest Resolution
Brightness
Contrast Ratio
Viewing Angle
Color System
Audio Output
Input Voltage
Power consumption
Signal Input
Ⅵ.ACCESSORIES
Ⅶ.Trouble shooting
Only black –and –white image
i.
Make the level of color saturation and brightness is proper
ii.
Power on but no picture
Make sure the AV& VGA cable are tightly connected from the video out connector &
VGA signal output connector .Make sure you are using the standard power adapter
Coming with the monitor
iii.
Wrong or abnormal colors
If any color is missing, check the cables to make sure it is securely connected .Broken or
loose pins in the cable connector can cause a bad connection
iv.
Remote controller doesn't work
Check the battery to make sure the battery is installed properly and make sure it is not a
low battery. The signal is interfered by some obstructions
λ
Remark:
If there are still any problems you connect with the related deals
If interruptive image occurs, it maybe that the VGA signal frequency isn't matched with
normal standard
If is a normal condition that some bright lines appear on the screen when you turn the unit
7 inches/177 mm
840 x 480 VGA
400 cd/m2
200:1
130/105 (horizontal/vertical)
PAL-4.43 NTSC 3.58
100mW
DC 10.8-13.8V
< 10W
PC, AV1, AV 2
Advertisement
Table of Contents
