Connect To The Power Source - Sony TV Receiver NSZ-GT1 Quick Setup Manual

step
step
Connect to the power source
Connect the AC adapter and AC power cord to the unit and wall outlet.
--=:J::==="
Change the TV input
Switch the input selector on the TV so that the signal from the unit
appears the your TV screen.
Press the
I /
c9
(on/standby) button
step Start Internet TV Box setup
Follow the directions of the Initial Setup Wizard displayed on the screen.
· When you skip the Network Setup, only limited functions will be
available with the unit.
• The screen may stay dark for several seconds after the Sony logo
disappears. Wait for a while until the Initial Setup Wizard is displayed.
• It takes about 15 minutes to complete the Initial Setup.
• This illustration may differ from the actual display.