Kenmore W10026587A Quick Start Manual

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME e (1-800-469-4663).
iiiiiiii!i ii
Models/Modelos/Modeles 110.2783", 2784*, 2787*
Electrical Shock Hazard
Plug into a grounded 3 prong outet.
Do not remove ground prong,
Do not use an adapter,
Do not use an extension cord.
Failure to folow these instructions can result in
death, fire, or electrical shock,
Measure detergent and pour into washer.
Drop sorted load loosely into washer. Load evenly around
agitator to maintain balance.
Close the lid.
Select Cycle, Water Level, Soil Level, Temperature and
Rinse option based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (rimer) knob to stop the washer.
i%1!iii
Fire Hazard
Never place items in the washer that are
dampened with gasolne or other flammable fluids.
No washer can completely remove oil
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
You should select the wast3/rinse water temperature
based on the type of load you are washing. Always use
the warmest wash water safe for fabric and follow garment
label instructions. For recommended use, see the Use and
Care Guide. Depending on location, water temperatures
may vary by season. The fill rate may also differ depending
on the water temperature selected.
J
II'1'I'£I L H£L IIIIRIL
Adjust to load size. Clothes should move freely. To change the water level after the wash action starts, you may turn knob to desired
setting. On models with Variable Water Level Control, you must turn the knob to Reset before changing the water level. This is
W10026587A Continued on back