Fundex Games Paddle Pool Instruction And Assembly Manual

ASSEMBLE THE OUTER FRAME

[ 4 LEFT WALLS & 4 RIGHT WALLS ]
LEFT
WALL
CORNER
CONNECTORS
• Connect the CENTER CONNECTORS.
along the side walls. Press firmly to
lock the connectors together.
This classic skill and action game
thrilled millions in the 1970's and
was a must have for years. The all
time classic is back and better than
ever. This game has in-your-face
action that's fun for the whole family.
• Connect 4 LEFT & 4 RIGHT
WALLS together by sliding the
left corner connector onto the
right corner connector as shown.
• PRESS FIRMLY RIGHT
WALL
to lock the corner
connectors together.
The final assembly
of the outer frame
LOOKS LIKE THIS!

ASSEMBLE THE GAME BOARD

[ 4 GAME BASES & 1 CENTER SUPPORT ]
TURN BASES
UPSIDE DOWN!
• On a hard surface, flip
the 4 game bases upside
down and position them
as shown to the right.
PRESS DOWN
FIRMLY!
• Tilt the final game base
and slip the last connectors
together as shown.
PRESS DOWN FIRMLY
to create a tight fit.
( Continue Step 2 on next page )
• Snap 3 of the 4 game bases
together. PRESS FIRMLY
on the connectors as shown
in the diagram to the left.
Make sure the pieces create
a tight fit.