Vauxhall Astra Owner's Manual page 187

186 Vehicle care
2. Unscrew the plastic securing nut
from the inside by hand.
3. Carefully withdraw the light
assembly from retaining pins and
remove. Make sure that the cable
duct remains in position.
4. Detach the cable from the
retainer.
5. Detach the wiring plug from the
bulb carrier.
6. Unscrew the three screws with
a coin and remove the bulb
carrier.
7. Remove and replace the bulb.
Tail lights (1)
Brake light (2)
Turn signal light (3)
8. Insert the bulb carrier into the tail
light assembly and screw into
place. Connect the wiring plug
and press the cable into the
retainer. Fit light assembly onto
retaining pins and tighten the
securing nut. Close the cover and
engage.
9. Switch on the ignition, operate
and check all lights.
Tail lights in the tailgate