1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite A130
  6. Maintenance manual

Toshiba Satellite A130 Maintenance Manual

Hide thumbs Also See for Satellite A130:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Toshiba Personal Computer
Satellite A130/ A135
Maintenance Manual
TOSHIBA CORPORATION
[CONFIDENTIAL]

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite A130

Summary of Contents for Toshiba Satellite A130

  • Page 1 Toshiba Personal Computer Satellite A130/ A135 Maintenance Manual TOSHIBA CORPORATION [CONFIDENTIAL]...
  • Page 2 © 2006 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.

  • Page 3: General

    This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite A130/ A135, referred to as the M100 Series in this manual. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field.

  • Page 4: Hardware Overview

    For example: Read Only Memory (ROM) Keys Keys are used in the text to describe many operations. The key top symbol as it appears on the keyboard is printed in boldface type. Key operation [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the typeface below: Format complete System transferred [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 6 Modem Troubleshooting ....................2-30 2.12 PCMCIA Troubleshooting .....................2-32 2.13 IEEE 1394 Troubleshooting...................2-34 2.14 Wireless LAN Troubleshooting ..................2-36 2.15 Finger printer troubleshooting..................2-38 2.16 Bluetooth Troubleshooting…………………...…………………………….………… 2-40 2.17 4 in 1 card Troubleshooting……………………………………………………..……..2-42 2.18 HDD Troubleshooting………………………………………………………………2-44 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...

  • Page 7: Table Of Contents

    3.17 Button Test……………………………………………………….……………………..3-26 3.18 Fingerprint DOS Test…………………………………………….……………………..3-27 3.19 Clear Fingerprint Registered…………………………………….….…………………...3-29 3.20 1st HDD Test…………………………………….………….…………………………..3-31 3.21 2nd HDD Test…………………………………..……………………………………….3-34 Chapter 4 Replacement Procedures General..........................4-1 Battery..........................4-7 PC Card..........................4-9 Memory Card .........................4-11 HDD..........................4-13 Expansion Memory......................4-17 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 8 Board Layout....................... B-1 Appendix C Pin Assignments ....................C-1 Appendix D Keyboard Scan/Character Codes.................D-1 Appendix E Key Layout ......................E-1 Appendix F Series Screw Torque List ..................F-1 Appendix G Reliability ......................G-1 [CONFIDENTIAL] viii Satellite A130/ A135 Series Maintenance Manual...

  • Page 9: Hardware Overview

    Chapter 1 Hardware Overview [CONFIDENTIAL]...
  • Page 10 1 Hardware Overview 1-ii Satellite A130/ A135 Maintenance Manual...
  • Page 11 Optical Disc Device ....................1-8 1.4.1 DVD-ROM & CD-RW ................1-8 1.4.2 DVD Super Multi Double Layer..............1-9 Power Supply ......................1-10 Batteries ........................1-12 1.6.1 Main Battery....................1-13 1.6.2 RTC battery ....................1-14 Satellite A130/ A135 Series Maintenance Manual 1-iii...
  • Page 12 2.5-inch HDD ....................1-6 Tables Table 1-1 2.5-inch HDD specifications ................. 1-7 Table 1-2 DVD-ROM & CD-RW drive specifications ..........1-8 Table 1-3 DVD Super Multi Double Layer drive specifications........1-9 Table 1-4 Battery specifications .................. 1-12 1-iv Satellite A130/ A135 Maintenance Manual...
  • Page 13 1.1 Features 1 Hardware Overview Features The Satellite A130 Series Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight and high reliability. This computer incorporates the following features and benefits: •...
  • Page 14 • Auto-backlight off when LCD cover closed • Full ACPI 2.0 supported • LCD auto-dim mode by time out Switch • One wireless communication switch • One power button switch • Control buttons for Short-Cut key functions. Satellite A130/ A135 Series Maintenance Manual...
  • Page 15 • 1MB Flash ROM for system BIOS • Suspend to RAM/Disk • Password protection (Power on, supervisor, HDD) • Various hot keys for system control • Refreshable • Complete ACPI 2.0 function • APM, S4BIOS not supported Satellite A130/ A135 Series Maintenance Manual...
  • Page 16 Some computers in this series are equipped with Bluetooth functionality (Version 2.0 + EDR) with antenna. Bluetooth is a short-range wireless technology used to create PANs (Personal Area Networks) among your devices, as well as with other nearby devices such as cell phones and digital cameras. Satellite A130/ A135 Series Maintenance Manual...

  • Page 17: System Unit

    • Intel Core Duo processor, T2060 • Intel Celeron M processor, 430 • XD bit support (Default is disable). System Logic • Intel 945PM/945GM/943GML + ICH7M for Satellite A130 Series (This combination depends on which system you bought) Memory • Support DDR-II 533/667MHz SO-DIMM...

  • Page 18: Inch Hard Disk Drive

    Formatte 37.26 55.89 74.52 93.15 111.8 149.05 186.31 capacity (GB) Logical 390,720,9 Blocks 78,125,000 117,187,500 156,301,488 195,371,568 234,441,648 312,581,808 (LBA) Rotation 5400/420 al speed 5400 5400 5400 5400 5400 5400/4200 (rpm) Toshiba Buffer (MB) Satellite A130/ A135 Series Maintenance Manual...

  • Page 19: Inch Hdd

    1.4 Optical Disk Device 1 Hardware Overview Hitachi Buffer (MB) Fujitsu Buffer (MB) Bytes sector Table 1-1 2.5-inch HDD specification Satellite A130/ A135 Series Maintenance Manual...

  • Page 20: Dvd-Rom & Cd-Rw Drive Specifications

    16.6 (PIO mode 4, Multiword DMA mode 2) Access time (ms) Average random access Data buffer size (Mbytes) DVD: DVD-VIDEO, DVD-ROM Formats supported CD-DA, CD-ROM, CD-R, CD-RW, CD-ROMXA, PhotoCD (single/multi-session), CD-EXTRA, CD-Text Table 1-2 DVD-ROM & CD-RW drive specifications Satellite A130/ A135 Series Maintenance Manual...

  • Page 21: Dvd Super Multi Double Layer Drive Specifications

    Data buffer size (Mbytes) DVD: DVD-VIDEO, DVD-ROM, DVD-R, DVD-RW, DVD-RAM, DVD+R, DVD+RW, DVD+R DL, DVD-R DL Formats supported CD-DA, CD-ROM, CD-R, CD-RW, CD-ROMXA, PhotoCD (single/multi-session), CD-EXTRA, CD-Text Table 1-3 DVD Super Multi Double Layer drive specifications Satellite A130/ A135 Series Maintenance Manual...

  • Page 22: Power Supply

    • Orange: The computer is quick-charging the battery / the battery is low. Power ON/OFF sequence • When power is turned on or off, the EC starts the power on or off sequence. – SQ0-4: power ON sequence – SQ5-B: power OFF sequence 1-10 Satellite A130/ A135 Series Maintenance Manual...
  • Page 23 • When a new battery is installed, the EC communicates with the E PROM in the battery to read information of the newly installed battery. Battery capacity calculation • The EC reads battery remaining and percentage capacity from the battery through SMBus. Satellite A130/ A135 Series Maintenance Manual 1-11...

  • Page 24: Battery Specifications

    Lithium-Ion 3.0V 14 mAH ML1220T10) RTC battery (Maxell Lithium-Ion 3.0V 18 mAH ML1220HT10) RTC battery (Sanyo Lithium-Ion 3.0V 15 mAH ML1220T28) RTC battery (Panasonic Lithium-Ion 3.0V 17 mAh ML1220/B) Table 1-4 Battery specifications 1-12 Satellite A130/ A135 Series Maintenance Manual...

  • Page 25: Main Battery

    4. The battery temperature is abnormal. 5. The battery SMBus communication fails. 6. The battery cell is bad. Detection of full charge A full charge is detected from the battery pack through SMBus when the battery is charging. Satellite A130/ A135 Series Maintenance Manual 1-13...

  • Page 26: Rtc Battery

    RTC battery. The RTC battery is charged by the adapter or main battery, while the computer is powered on. Status Time Charging Time (power on) About 24 hours Data preservation period (full charge) 1 month 1-14 Satellite A130/ A135 Series Maintenance Manual...
  • Page 27 Chapter 2 Troubleshooting Procedures...
  • Page 29 PCMCIA Troubleshooting...................32 2.13 IEEE 1394 Troubleshooting ..................34 2.14 Wireless LAN Troubleshooting...................36 2.15 Finger printer troubleshooting ..................38 2.16 Bluetooth Troubleshooting…………………...…………………………….……….. 40 2.17 4 in 1 card Troubleshooting……………………………………………………..……42 2.18 HDD Troubleshooting……………………………………………………………..44 2.19 HDD Troubleshooting……………………………………..……………………...46 [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 30: Figure

    Figure 2-16 4 in 1 card troubleshooting process……………………………..…….………42 Figure 2-17 1stHDD troubleshooting process…………………………..……………….44 Figure 2-18 HDD troubleshooting process…………………………………………..46 Tables Table 2-1 Battery LED ....................... 10 Table 2-2 DC-IN LED ......................11 [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 31: Troubleshooting Introduction

    7. Cleaning kit for optical drive troubleshooting 8. Multimeter 9. External monitor 10. USB compatible keyboard 11. Multimedia sound system with line-in and line-out ports 12. Headphones 13. USB test module and USB cable 14. Music CD [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 32: Troubleshooting Flowchart

    Ask the user if a password is registered and, if it is, ask him or her to enter the password. Verify with the customer that Toshiba Windows Vista is installed on the hard disk. Operating systems that were not preinstalled by Toshiba can cause the computer to malfunction.

  • Page 33: Troubleshooting Procedures

    R u n C M 1 6 5 .E X E a n d se le c t th e H A R D D IS K ite m . Y es Figure 2-1 Troubleshooting flowchart (1/2) [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 34 Is an error detected by any of the an error, perform the diagnostics tests? appropriate procedure as outlined below. System is normal Figure 2-1 Troubleshooting flowchart (2/2) [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 35 Section 2.9 and the Optical Drive Troubleshooting Procedures in Section 2.10. 6. If an error is detected by the modem test, perform the Modem Troubleshooting Procedures in Section 2.11. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 36: Nd Hdd Troubleshooting

    11. If an error is detected when using the 1 HDD, perform the 1 HDD Troubleshooting procedures in Section 2.18. 12. If an error is detected when using the 2 HDD, perform the 2 HDD troubleshooting procedures in Section 2.19. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 37: Power Supply Troubleshooting

    (P rocedure 4) P erform internal connection A re the internal power check connections secure? (P rocedure 5) Y es R eplace system board E N D Figure 2-2 Power Supply Troubleshooting Process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 38 (LED on for 1 second protected and cannot be re-powered on every 2 seconds) without the AC power connected. Amber color off Battery not in low or critical low state; It’s in discharging state [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 39 Connect a new AC adaptor. If the problem is not resolved, go to Check 2. Check 2 Insert a new battery. If the problem is still not resolved, go to Procedure 3. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 40 Check 6 Make sure the battery pack is installed in the computer correctly. If the battery is properly installed and the battery LED still does not light, go to Procedure 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 41 Make sure that the battery cable is firmly connected to the system board. If it is connected firmly, go to Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 42: Display Troubleshooting

    ( P r o c e d u r e 3 ) R e p la c e s y s te m b o a r d E N D Figure 2-3 Display troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 43 Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. If an error is not detected, the display is functioning properly. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 44 Replace the CPU with another of the same specifications. If the problem still exists, perform Check 6. Check 6 The system board may be damaged. Replace it with a new one. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 45: Keyboard Troubleshooting

    ( P r o c e d u r e 3 ) R e p la c e s y s te m b o a r d E N D Figure 2-4 Keyboard troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 46 Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 47: External Usb Devices Troubleshooting

    R e p la c e s y s te m b o a r d ( P r o c e d u r e 2 ) E N D Figure 2-5 External USB device troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 48 Go to Procedure 2. Procedure 2 Replace system board If the error persists, the system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 49: Tv-Out Failure Troubleshooting

    T V fu n c tio n in g o k ? s e t Y es R e p la c e s y s te m b o a r d E N D Figure 2-6 TV-out troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 50 If the replacement set does not work the system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 51: Touchpad Troubleshooting

    2 Troubleshooting Procedures TouchPad Troubleshooting START TouchPad connection check (Procedure 1) TouchPad replacement check (Procedure 2) Replace system board Figure 2-7 Touchpad troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 52 The TouchPad unit or FPC may be defective or damaged. Replace each with a new one following the steps in Chapter 4. If the FDD is still not functioning properly, replace the system board with a new one following the steps in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 53: Speaker Troubleshooting

    - see Figure 2-1 Perform earphone test (Procedure 2) Do earphones function correctly? Perform connection check (Procedure 3) Perform replacement check (Procedure 4) Replace system board Figure 2-8 Speaker troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 54 If the stereo speakers don't sound properly, the stereo speakers may be defective or damaged. Replace them with new ones. If the stereo speakers still do not work properly, try replacing in turn the audio board and system board. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 55: Optical Drive Troubleshooting

    Audio CD functions ok? (Procedure 2) Perform software check (Procedure 3) Perform diagnostic test (Procedure 4) Perform connection and replacement check (Procedure 5) Replace system board Figure 2-9 Optical drive troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 56 2 Troubleshooting Procedures This section describes how to determine if the computer’s internal optical drive is functioning properly. The Satellite A130/A135 /Satellite Pro A130 module bays can accommodate the following optical drives: DVD SuperMulti supporting +-R Double Rayer COMBO device Figure 2-11 outlines the process.
  • Page 57 Chapter 4, Replacement Procedures. If the drive is still not functioning properly, perform Check 3. Check 3 The system board may be damaged. Replace it with new one following the instructions in Chapter 4, Replacement Procedures. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 58: Modem Troubleshooting

    Check / replace Computer unable to telephone line and detect telephone signal? connections Perform connection check (Procedure 2) Perform replacement check (Procedure 3) Replace system board Figure 2-10 Modem troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 59 The modem card or RJ-11 jack may be faulty. Try replacing them. If the problem persists, the system board may be defective or damaged. Replace the System Board with a new one following the steps in Chapter 4, Replacement Procedures. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 60: Pcmcia Troubleshooting

    Perform SYCARD test (Procedure 1) Do errors occur during PCMCIA unit is SYCARD test? not faulty. Perform PCMCIA socket replacement check (Procedure 2) Replace system board Figure 2-11 PCMCIA troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 61 Procedures and replace the socket. If the problem persists, the system board may be defective or damaged. Replace the system board with a new one following the steps in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 62: Ieee 1394 Troubleshooting

    Was an IEEE 1394 problem detected? faulty. Continue troubleshooting - refer to Figure 2.1 Perform connection and replacement check (Procedure 3) Replace system board Figure 2-12 IEEE 1394 troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 63 The transmission cable may be damaged. Replace with a good cable. If the malfunction persists, go to Check 4 Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 64: Wireless Lan Troubleshooting

    Was a wireless LAN problem delected? troubleshooting - refer to Figure 2.1 Perform connector and replacement check (Procedure 2) Replace wireless LAN antenna/unit Replace system board Figure 2-13 Wireless LAN troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 65 Chapter 4. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 66: Finger Printer Troubleshooting

    2 Troubleshooting Procedures 2.15 Finger printer Troubleshooting Figure 2-14 Finger printer troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 67 Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 68: Bluetooth Troubleshooting

    (P roce dure 2) Re pla ce Blue tooth a nte nna m oudle . R e pla ce s ys te m boa rd Figure 2-15 Bluetooth troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 69 Chapter 4. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 70: In 1 Card Troubleshooting

    4 IN 1 unit is not IN 1 CARD test? faulty. Perform 4 IN 1 card socket replacement check (Procedure 2) Replace system board Figure 2-16 4 in 1 card troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 71 Procedures and replace the socket. If the problem persists, the system board may be defective or damaged. Replace the system board with a new one following the steps in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 72 2 Troubleshooting Procedures 2.18 1 HDD Troubleshooting Figure 2-17 HDD troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 73 Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 74 2 Troubleshooting Procedures [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 75 2 Troubleshooting Procedures 2.19 2 HDD Troubleshooting Figure 2-18 2 HDD troubleshooting process [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 76 Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. [CONFIDENTIAL] Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 77 3. Tests and Diagnostics Chapter 3 Tests and Diagnostics Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 78 3.14 RTC Test ........................3-23 3.15 Read 1394 GUID......................3-24 3.16 Speaker EQ Check…………...………….…………………………………...……..3-25 3.17 Button Test …………..……………………………………………………………….3-26 3.18 Fingerprint DOS Test ……………………..…………………………………………3-27 3.19 Clear Fingerprint Registered…………………………………………………………...3-29 3.20 HDD Test........................3-31 3.21 HDD Test…………………………………………………………………………..3-34 3-2 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 79: The Diagnostic Test

    A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test) A data CD disc (ODD Test) A LAN loopback The following sections explain how to execute the Test & Diagnostic Program and detail the tests within the program. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 80: Executing The Diagnostic Test

    K. LAN TEST L. RTC TEST M. IEEE1394 CODE TEST N. SPEAKER EQ CHECK TEST O. BUTTON TEST P. FINGERPRINT TEST Q. CLEAR FP REGISTERED R. 1 HDD TEST S. 2 HDD TEST 3-4 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 81 3. Tests and Diagnostics The below display will show up at the beginning of T&D program If the test result passes, the following display will show up: Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 82 If an error is detected and a test fails, the following message displays: Then press any key for next actions – the below display presented if copying test log file onto diskette is necessary. This action will be executed when “Y” key pressed. 3-6 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 83 And then it will check if it’s necessary to leave this program. Program will quit when “Y” key pressed and it will go back main menu for next test if “N” key pressed. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 84: Display Configuration

    HDD type & capacity (Vendor ID. Model .Firmware) VRAM size / VGA CHIP TYPE Battery cell (6cell;9cell;12cell) Wireless type LAN Type 1394 Bluetooth SKU ID The screen should display as below: 3-8 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 85: Speaker Audio Test

    OK within 3 times “Beep” sound generated. NOTE: Remember to tune up the volume as “Maximum” before this test starts. The screen should display as below, indicating whether the test is passed or failed after the question. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 86: Fan On/Off Test

    The computer will stop the fan working after any key pressed. Feel the wind or listen the sound to check if the fan is “OFF”. The screen should display as below, indicating whether the test is passed or failed after the question. 3-10 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 87: Main Battery Charge Test

    - “Battery Is Full” showed when “remain charge capacities” is 100% The screen should display as below, if the charge function is OK, will show:. If the charge function is NG, the screen will display as: Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-11...

  • Page 88: Fdd Test

    NOTE: The write-protected device of this formatted diskette should be “Disable”. The subtests run automatically. NOTE: Press “Esc” key can skip the current subtest. The screen should display as below, indicating whether the subtests pass or fail when finished. 3-12 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 89: Odd Test

    The ODD test includes two subtests of the: 1. Random read/partial sequential read function 2. Eject ODD door The screen should display as below, indicating whether the subtests pass or fail when finished. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-13...

  • Page 90: Keyboard Test

    NOTE: The “Fn” key cannot be tested in the keyboard test. To determine whether the “Fn” key is working correctly, press “Fn+F6 ” or “Fn+F7 ” keys to check if LCD display brightness change gradually. 3-14 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 91 3. Tests and Diagnostics Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-15...

  • Page 92: Mouse (Pad) Test

    The Touch Pad button subtest allows users to test their Touch Pad buttons. If the buttons are clicked, the cursors should appear in the corresponding box of the button figure that is displayed on the screen as below. 3-16 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 93 NOTE: The above figure has three compartments although the Touch Pad installed may only have two buttons. In this case, the central compartment in the figure does not correspond to any button. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-17...

  • Page 94: Lcd Pixels Mode Test

    - including 320*200 (4/16/256 colors), 640*200 (2/16 colors), 640*350 (2/16 colors), 640*480 (2/16/256 colors), 800*600 (256 colors) and 1024*768 (256 colors). The screen should display as below, indicating whether the test is passed or failed after the question. 3-18 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 95: Magnetic Switch Test

    Follow below steps to run this test: 1. Close the LCD cover. 2. Heard 3 “Beep” sound happened during LCD closed. 3. Open the LCD. Then it will indicate whether the test is passed or failed. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-19...

  • Page 96: Lan Test

    Line Frame – 1514 Bytes. Line Speed – 100Mbps or 10 Mbps. Bus ID – it’s “4”. The LAN test includes three subtests of the: 1. Speed1000 2. Speed100 3. Speed10 The subtests run automatically. 3-20 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 97 3. Tests and Diagnostics The screen should display as below, indicating whether the subtests pass or fail when finished. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-21...
  • Page 98 3. Tests and Diagnostics If an error is detected and a test fails, the following message displays: 3-22 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 99: Rtc Test

    Checks the computer’s RTC (Real Time Clock) and calendar functions by comparing the DOS and CMOS values. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-23...

  • Page 100: Read 1394 Guid

    This test will check if the computer’s EEPROM 1394GUID code is correct. NOTE: Must open the RAM Door to see RAM connector GUID bar code before test item begins. The figure below will be displayed: 3-24 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 101 1. Read EQ Type from EEPROM 2. Re-Write EQ Type to EEPROM NOTE: To execute this test, you must select speaker type (Harman or No brand). The figure below will be displayed: Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-25...

  • Page 102: Button Test

    Press each of the buttons on the front panel in turn. A yellow bar will appear on the relevant section of the figure if the button passes the test. Press Ctrl +C to quit the test. 3-26 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 103: Fingerprint Dos Test

    Step2. Need you swipe your finger 2 time to enroll. Step3. Need you swipe your finger 3 time to enroll. Step4. The test program auto compare 1 , 2nd and 3 finger then to enroll. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-27...
  • Page 104 3. Tests and Diagnostics Step5. Need you swipe your finger then test program will verify it. Step6. Verify pass, Step7. Need you select your test result to show “PASS” or “Fail”. 3-28 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 105: Clear Fingerprint Registered

    " to clear all information in TBX module The subtests run step by step: (As below) Step1: Step2: Display Notice for clear registered. Step3: below information was the utility auto run. Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-29...
  • Page 106 Step5: If you choice “Y”, the system will reboot. If you choice “N”, the system will show Notice again (see be photo). You can press any key to go back test MEMU list. 3-30 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 107 After the choice HDD test, Screen would display as below: If input password is Right, the screen would display as below: Press any key to test HDD function, the screen would display as below: Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-31...
  • Page 108 The screen will display as below picture to show the subtest is passed or failed when finished: If it is show the picture as below, it means HDD function is OK 3-32 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 109 3. Tests and Diagnostics If the picture shows as below, it means he HDD function is NG Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-33...
  • Page 110 After the choice HDD test, Screen would display as below: If input password is Right, the screen would display as below: Press any key to test HDD function, the screen would display as below: 3-34 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...
  • Page 111 The screen will display as below picture to show the subtest is passed or failed when finished: If it is show the picture as below, it means HDD function is OK Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual 3-35...
  • Page 112 3. Tests and Diagnostics If the picture shows as below, it means he HDD function is NG NOTE: The AC adaptor should be connected to successfully run this test. 3-36 Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manual...

  • Page 113: Replacement Procedures

    Chapter 4 Replacement Procedures [CONFIDENTIAL]...
  • Page 115 Fingerprint Module ....................4-50 4.20 Touch Pad........................4-52 4.21 Bluetooth module ....................... 4-54 4.22 Speakers ........................4-56 4.23 USB Board ......................... 4-58 4.24 System Board ......................4-60 4.25 VGA Module......................4-62 4.26 Fan & CPU ......................... 4-64 Satellite A130/ A135 Maintenance Manual...
  • Page 116 Removing the modem module screws............4-25 Figure 4-26 Removing the modem connector..............4-25 Figure 4-27 Removing the modem module..............4-26 Figure 4-28 Removing the optical drive screw ..............4-27 Figure 4-29 Removing the optical drive module .............4-27 4-ii Satellite A130/ A135 Series Maintenance Manual...
  • Page 117 Removing the fingerprint module bracket screws ........4-50 Figure 4-58 Removing the fingerprint module bracket ........... 4-50 Figure 4-59 Removing the fingerprint module..............4-51 Figure 4-60 Removing the touch pad screw ..............4-52 Figure 4-61 Removing the touch pad ................4-52 Satellite A130/ A135 Maintenance Manual 4-iii...
  • Page 118 Removing the fan connector.................4-65 Figure 4-81 Removing the fan screw from the top side of the system board ....4-65 Figure 4-82 Removing the fan ..................4-66 Figure 4-83 Turning the CPU cam...................4-66 Figure 4-84 Removing the CPU..................4-67 4-iv Satellite A130/ A135 Series Maintenance Manual...

  • Page 119: General

    Memory Module Modem Card Display assembly Top Cover Display Mask Finger Touch Bluetooth Direct Play Print Speakers USB Board System Board Module Button Module Module Fan and Heat Inverter sink Module Board LCD Module Satellite A130/ A135 Maintenance Manual...
  • Page 120 Memory Module Modem Card Display assembly Top Cover Display Mask Finger Touch Bluetooth Direct Play Print Speakers USB Board System Board Module Button Module Module Fan and Heat Inverter sink Module Board LCD Module Satellite A130/ A135 Series Maintenance Manual...
  • Page 121 Always use the lithium ion battery pack or a backup battery that is authorized by Toshiba or is compatible with the unit. Since other battery packs have different specifications, they may be incompatible with the unit, and may burst or explode.
  • Page 122 The computer contains many sharp edges and corners, so be careful not to injure yourself. 10. After you have replaced a FRU, make sure the computer is functioning properly by performing the appropriate test on the FRU you have fixed or replaced. Satellite A130/ A135 Series Maintenance Manual...
  • Page 123 FRU. After installing an FRU in the computer, confirm that the FRU and the computer are functioning properly. Satellite A130/ A135 Maintenance Manual...
  • Page 124 Tweezers, to lift out screws that you cannot grasp with your fingers. ESD mats for the floor and the table you are working on. ESD wrist strap or heel grounder. Anti-static carpeting or flooring. Air-ionizers in highly static sensitive areas. Satellite A130/ A135 Series Maintenance Manual...

  • Page 125: Battery

    Slide the battery bay latch to release the battery pack and then remove the battery pack from the bay. Figure 4-2 Removing the battery pack NOTE: For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to Toshiba. Satellite A130/ A135 Maintenance Manual...

  • Page 126: Battery

    WARNING: The battery is a lithium ion battery and can explode if not properly replaced, used, handled or disposed of. Use only batteries recommended by Toshiba as replacements. Slide the battery pack into the battery bay. The battery bay latch will click automatically.

  • Page 127: Pc Card

    2. Push the eject button again to pop the PC card out slightly. 3. Grasp the PC card and pull it out from the slot. Figure 4-3 Removing the PC card 4. Press the eject button back into place, if necessary. Satellite A130/ A135 Maintenance Manual...
  • Page 128 1. Make sure the eject button does not stick out. Push it back into place if required. 2. Insert the PC card in the slot and gently press to ensure a firm connection. Figure 4-4 Installing the PC card 4-10 Satellite A130/ A135 Series Maintenance Manual...

  • Page 129: Memory Card

    To remove a memory card, follow the steps below: 1. Press the memory card gently into the socket until it pops out. Figure 4-5 Pressing the memory card 2. Grasp the memory and remove it. Figure 4-6 Removing the memory card Satellite A130/ A135 Maintenance Manual 4-11...

  • Page 130: Memory Card

    Inserting the Memory Card To insert a memory card, follow the steps below: 1. Insert the memory card in the slot and gently press to ensure a firm connection. Figure 4-7 Installing the memory card 4-12 Satellite A130/ A135 Series Maintenance Manual...

  • Page 131: Hdd

    Follow the steps below to remove Main HDD module: 1. Turn the computer upside down. 2. Release the two black M2.5x3 screws to release the main HDD door. Secondary Main HDD Figure 4-9 Releasing the main HDD door screw Satellite A130/ A135 Maintenance Manual 4-13...
  • Page 132 Figure 4-10 Removing the main HDD door 4. Pull out the black Mylar tab to remove the HDD unit. Figure 4-11 Removing the main HDD 5. Remove the HDD from the HDD case. 4-14 Satellite A130/ A135 Series Maintenance Manual...
  • Page 133 4 Replacement Procedures 6. Pull the HDD outwards and remove the four M3x3 silver screws that secure the HDD case and bracket to the HDD. Figure 4-12 Removing the HDD screws from bracket Satellite A130/ A135 Maintenance Manual 4-15...
  • Page 134 2. Release the two black M2.5x3 screws to release the secondary HDD door. Secondary Main HDD Figure 4-13 Releasing the secondary HDD door screw 3. Pull up and lift the HDD door to remove it. Figure 4-14 Removing the secondary HDD door 4-16 Satellite A130/ A135 Series Maintenance Manual...
  • Page 135 1. Seat the secondary HDD in the HDD case and bracket, and secure it with four M3×3 silver screws. 2. Insert the secondary HDD unit into the HDD slot on the right. 3. Secure the HDD door with two black M2.5x3 screws. Satellite A130/ A135 Maintenance Manual 4-17...

  • Page 136: Expansion Memory

    Release the black non-separate screw M2.5x5.4 screws securing the memory module socket cover. Figure 4-16 Releasing the cover screw Slide your fingernail or a thin object under the cover and lift it off. Figure 4-17 Removing the expansion memory module cover 4-18 Satellite A130/ A135 Series Maintenance Manual...
  • Page 137 Repeat steps 3 and 4 to remove the second memory expansion module in the same way. CAUTION: Do not touch the connectors on the expansion memory module or on the computer. Debris on the connectors may cause memory access problems. Satellite A130/ A135 Maintenance Manual 4-19...
  • Page 138 Fit the module's connectors into the computer's connectors at about a 45-degree angle and press the module carefully to ensure a firm connection. Push the module down so it lies flat. The latches on either side will click into place to secure the module. 4-20 Satellite A130/ A135 Series Maintenance Manual...

  • Page 139: Wireless Lan Unit

    1. Remove the black non-separate M2.5x5.4 screw securing the wireless LAN door. Figure 4-20 Removing the wireless LAN unit screw 2. Remove the wireless LAN door. Figure 4-21 Removing the wireless LAN door Satellite A130/ A135 Maintenance Manual 4-21...
  • Page 140 4. Detach the two ends of the wireless LAN antenna (black and white). Figure 4-23 Removing the wireless LAN antenna connectors NOTE: The W, B, G markings on logic low indicate white, black, and gray respectively. 4-22 Satellite A130/ A135 Series Maintenance Manual...
  • Page 141 5. Remove the wireless LAN unit. Figure 4-24 Releasing the wireless LAN unit CAUTION: Do not touch the connectors on the wireless LAN unit or on the computer. Debris on the connectors may cause malfunction. Satellite A130/ A135 Maintenance Manual 4-23...
  • Page 142 3. Secure the wireless LAN module to the system board with two M2.5x3 screws. 4. Attach the white antenna to the main connector, and the black antenna to the Aux connector. 5. Use the black non-separate M2.5x5.4 screw to secure the wireless LAN door. 4-24 Satellite A130/ A135 Series Maintenance Manual...

  • Page 143: Modem

    1. After removing the WLAN card as described in the previous section, release the two M2.5x3 screws securing the modem module. Figure 4-25 Removing the modem module screws 2. Disconnect the modem connector from the modem module. Figure 4-26 Removing the modem connector Satellite A130/ A135 Maintenance Manual 4-25...
  • Page 144 2. Fit the modem onto its connector and secure it with two black M2.5x3 screws. 3. Install the wireless LAN card on top of modem and then replace the M2.5x5.4 screw to fix the WLAN cover. 4-26 Satellite A130/ A135 Series Maintenance Manual...

  • Page 145: Optical Drive Module

    Remove the black M2.5x8 screw securing the optical drive module. Figure 4-28 Removing the optical drive screw Use your hand to push the module bracket and then slide the module from the bay. Figure 4-29 Removing the optical drive module Satellite A130/ A135 Maintenance Manual 4-27...
  • Page 146 2. Slide the device into the optical drive module bay. 3. Use the black M2.5x8 screw to secure the optical drive module. 4. Install the expansion memory modules as described in the preceding section. 5. Replace the expansion memory module cover. 4-28 Satellite A130/ A135 Series Maintenance Manual...

  • Page 147: Optical Drive

    Figure 4-30 Removing the optical drive bracket NOTE: The small arrow shown on the metal bracket indicates the top side of the optical bracket. Keep this in mind when removing or installing the drive. Satellite A130/ A135 Maintenance Manual 4-29...
  • Page 148 1. Position the optical drive bracket plate so that it is aligned with the rear panel of optical drive. 2. Secure the optical drive bracket plate with two M2x3 screws. 3. Install the optical drive module into the bay as described in the preceding section. 4-30 Satellite A130/ A135 Series Maintenance Manual...

  • Page 149: Keyboard

    Figure 4-31 Removing the strip cover NOTE: The display panel must be fully open in order to remove the strip cover. 3. Remove the strip cover. Figure 4-32 Removing the strip cover Satellite A130/ A135 Maintenance Manual 4-31...
  • Page 150 5. Push the center of the keyboard, press the center tab, and lift the keyboard out, revealing the keyboard cable underneath. Disconnect the keyboard cable from the system board. Figure 4-34 Disconnecting the keyboard cable 4-32 Satellite A130/ A135 Series Maintenance Manual...
  • Page 151 2. Place the keyboard on the top cover, insert under the center tab, and secure it with two black M2.5x3 screws. 3. Set the strip cover and press down to secure the strip cover until the latches engage. Satellite A130/ A135 Maintenance Manual 4-33...

  • Page 152: Display Assembly

    Also remove the Bluetooth antenna connector (peach) from the module. 2. Disconnect the black LCD power (LVDS) cable, Bluetooth cable, and wireless LAN cable from the system board. Figure 4-36 Disconnecting cables 4-34 Satellite A130/ A135 Series Maintenance Manual...
  • Page 153 3. Remove four M2.5x8 screws securing the LCD assembly to the top cover Figure 4-37 Removing the front screws 4. Remove two M2.5x8 black screws securing the LCD assembly from the rear side. Figure 4-38 Disconnecting the rear screws Satellite A130/ A135 Maintenance Manual 4-35...
  • Page 154 4 Replacement Procedures 5. Remove the LCD assembly. Figure 4-39 Removing the display assembly 4-36 Satellite A130/ A135 Series Maintenance Manual...
  • Page 155 Feed the wireless LAN module’s antenna wires through the indented track on the system board towards the rear side. Connect the Bluetooth connector to the Bluetooth module. Connect the LCD power cable to the top chassis. Reinstall the keyboard and wireless LAN module. Satellite A130/ A135 Maintenance Manual 4-37...

  • Page 156: Display Mask

    Remove five rubber pads to reveal the five M2.5x6 black screws securing the display mask to the LCD module. Figure 4-40 Removing the rubber pads Remove the five M2.5x6 black screws securing the display mask. Figure 4-41 Removing the display mask screws 4-38 Satellite A130/ A135 Series Maintenance Manual...
  • Page 157 To install the display mask, follow the steps below and refer to the figures in the preceding section. Seat the display mask and secure the snaps on each side. Secure the display mask with five M2.5x6 screws and then replace the rubber pads on top. Satellite A130/ A135 Maintenance Manual 4-39...

  • Page 158: Fl Inverter Board

    Remove the M2x3 black screw securing the FL inverter board to the LCD display assembly. Figure 4-43 Removing the screws Disconnect the two connectors on either side of the board. Figure 4-44 Removing the connectors 4-40 Satellite A130/ A135 Series Maintenance Manual...
  • Page 159 Place the FL inverter board on the LCD module. Secure one M2x3 black screw connecting the FL inverter board to the LCD display assembly. Connect the two connectors on either side of the board. Satellite A130/ A135 Maintenance Manual 4-41...

  • Page 160: Lcd Module

    2. Remove six M2x3 screws securing the LCD module bracket to the LCD module. Figure 4-47 Removing the bracket screws NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket. Then replace the whole LCD module unit. 4-42 Satellite A130/ A135 Series Maintenance Manual...
  • Page 161 M2x3 black screws. Note the L and R markings to make sure that the bracket arms are secured on the correct side. 3. Seat the LCD module with bracket on the chassis. 4. Arrange the LVDS cable in the chassis. Satellite A130/ A135 Maintenance Manual 4-43...

  • Page 162: Bluetooth And Wlan Antennas

    2. Secure the Bluetooth antenna with the tab on the lower right corner. Make sure all cables are arranged properly in the clamps and use scotch tape to fix the antennas in the four corners. 4-44 Satellite A130/ A135 Series Maintenance Manual...

  • Page 163: Top Cover

    1. Turn the computer upside down and remove the following 16 screws from the rear panel: • M2.5X6: four screws (denoted by white arrows) • M2.5X8: twelve screws (denoted by black arrows) Figure 4-50 Removing the top cover (back panel screws) Satellite A130/ A135 Maintenance Manual 4-45...
  • Page 164 FFC cable, and the Function Button cable from the top cover. Figure 4-51 Removing the cables 3. Remove the three M2.5x6 black screws securing the top cover. Figure 4-52 Removing the top cover (front panel screws) 4-46 Satellite A130/ A135 Series Maintenance Manual...
  • Page 165 FFC cable, and the Function Button cable to the system board. Secure the top cover with three M2.5x6 black screws. Turn the computer upside down and secure the 16 screws to the rear panel. Satellite A130/ A135 Maintenance Manual 4-47...

  • Page 166: Function Button Board

    Button Board to lever the strip cover up. Figure 4-54 Removing the Function Button Board 2. Remove the Function Button Board Cable attached to the system board. Figure 4-55 Removing the Direct Play Button Board cable 4-48 Satellite A130/ A135 Series Maintenance Manual...
  • Page 167 To install the Function Button Board, follow the steps below and refer to the figures in the preceding section. 1. Snap the Function Button Board in place. 2. Connect the cable to the connector on the system board. 3. Replace the cover of the Function Button Board. Satellite A130/ A135 Maintenance Manual 4-49...

  • Page 168: Fingerprint Module

    1. Remove four M2.0x2.3 black screws securing the Fingerprint Module Bracket to the rear side of the top cover. Figure 4-57 Removing the fingerprint module bracket screws 2. Remove the bracket. Figure 4-58 Removing the fingerprint module bracket 4-50 Satellite A130/ A135 Series Maintenance Manual...
  • Page 169 To install the Fingerprint Module, follow the steps below and refer to the figures in the preceding section: 1. Turn the top cover upside down and place the Fingerprint Module and the Fingerprint Module Bracket in position on top. 2. Secure the Fingerprint Module bracket with four M2.0x2.3 black screws. Satellite A130/ A135 Maintenance Manual 4-51...

  • Page 170: Touch Pad

    1. Remove five M2.5x3 screws securing the Touch Pad Bracket to the rear side of the top cover. Figure 4-60 Removing the touch pad screw 2. Remove the Touch Pad by lifting it gently. Figure 4-61 Removing the touch pad 4-52 Satellite A130/ A135 Series Maintenance Manual...
  • Page 171 1. Turn the top cover upside down and place the Touch Pad and the Touch Pad Bracket in position on top. 2. Secure the Touch Pad bracket with five M2.5x3 screws. 3. Replace the Fingerprint module as described in the previous sections. Satellite A130/ A135 Maintenance Manual 4-53...

  • Page 172: Bluetooth Module

    1. Disconnect the Bluetooth FFC cable from the system board. Figure 4-62 Disconnecting the FFC cable 2. Remove the M2x3 black screw securing the Bluetooth module to the system board. Figure 4-63 Removing the Bluetooth module screw 4-54 Satellite A130/ A135 Series Maintenance Manual...
  • Page 173 Secure the module to the system board using one black M2x3 screw. Connect the FFC cable to the module to connect to the system board. Connect the Bluetooth connector (brown) to the module after replacing the top cover. Satellite A130/ A135 Maintenance Manual 4-55...

  • Page 174: Speakers

    1. Remove the two M2.5x5 screws securing the left speaker to the rear side of the top cover. Remove the two M2.5x5 screws securing the right speaker to the rear side of the top cover. Figure 4-66 Removing the speaker screws 2. Remove the speakers. Figure 4-67 Removing the speakers 4-56 Satellite A130/ A135 Series Maintenance Manual...
  • Page 175 2. Replace the speakers and secure with two M2.5x5 screws on each side. 3. Turn over and install the top cover onto the system board. 4. Connect the speaker cables (black and red) to the system board. Satellite A130/ A135 Maintenance Manual 4-57...

  • Page 176: Usb Board

    1. Remove the M2.5x3 screw securing the USB board to the system board. Figure 4-69 Removing the USB Board screws 2. Remove the USB board cable. Figure 4-70 Removing the USB Board cable 4-58 Satellite A130/ A135 Series Maintenance Manual...
  • Page 177 To install the USB board, follow the steps below and refer to the figures in the preceding section: 1. Place the USB board in position next to the system board. 2. Connect the USB board cable to the system board. 3. Secure the USB board with one M2.5x3 screw. Satellite A130/ A135 Maintenance Manual 4-59...

  • Page 178: System Board

    VGA screws from the system board. M2.5x 6 screws M2.5x 3 screws Figure 4-72 Removing the system board screws and the hexagonal screw 2. Remove the DC connector from its socket. Figure 4-73 Removing the DC cable 4-60 Satellite A130/ A135 Series Maintenance Manual...
  • Page 179 2. Replace the two M2.5x6 screws and two M2.5x3 screws securing the system board. 3. Replace the two hexagonal screws to secure the VGA port. 4. Connect the power connector in its socket. Satellite A130/ A135 Maintenance Manual 4-61...

  • Page 180: Vga Module

    1. Turn the system board over and remove the three M2.5x3 screws securing the VGA bracket. Figure 4-75 Removing the VGA module screws 2. Remove the VGA module from the system board. Figure 4-76 Removing the VGA module 4-62 Satellite A130/ A135 Series Maintenance Manual...
  • Page 181 1. Connect the heat sink to the VGA module by securing it with four M2.5x3 screws. Follow the order indicated by the numbers on the heat sink to tighten the screws. 2. Seat the VGA module and secure the module by placing the three M2.5x3 screws and tightening them. Satellite A130/ A135 Maintenance Manual 4-63...

  • Page 182: Fan & Cpu

    Turn the system board upside down. Remove the four M2.5x6 screws from the heat sink. Figure 4-78 Removing the heat sink screws Lift and remove the heat sink from the system board. Figure 4-79 Removing the heat sink 4-64 Satellite A130/ A135 Series Maintenance Manual...
  • Page 183 Figure 4-80 Removing the fan connector Remove the M2.5x3 screw securing the fan from the top side of the system board. Figure 4-81 Removing the fan screw from the top side of the system board Satellite A130/ A135 Maintenance Manual 4-65...
  • Page 184 Turn the cam on the CPU socket with a flat-blade screwdriver so that the notch on the cam is aligned with the open side of the CPU socket to unlock the CPU. Figure 4-83 Turning the CPU cam 4-66 Satellite A130/ A135 Series Maintenance Manual...
  • Page 185 4 Replacement Procedures Gently lift out the CPU. Figure 4-84 Removing the CPU Satellite A130/ A135 Maintenance Manual 4-67...
  • Page 186 Seat the fan module and secure with the M2.5x3 screw on the front side of the system board. Attach the fan connector. Seat the heat sink over the CPU and secure with four screws in the order indicated on the heat sink. 4-68 Satellite A130/ A135 Series Maintenance Manual...

  • Page 187: Appendices

    Appendices [CONFIDENTIAL]...
  • Page 188 Appendices [CONFIDENTIAL] App-ii Satellite A130/ A135 Series Maintenance Manual...
  • Page 189 JP2 SPK Connector (2-pin)................... C-19 C.21 JP33 SPK Connector (2-pin)..................C-19 C.22 PJP2 BATT Connector (7-pin) ..................C-19 C.23 JP6 Fingerprint Board Connector (5-pin) ..............C-20 C.24 JP34 USB Board Connector (10-pin) ................C-20 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual App-iii...
  • Page 190 Norwegian (NW) Keyboard ..................E-11 E.22 Dutch (DU) Keyboard ....................E-11 E.23 Lithuanian (LI) Keyboard ..................... E-12 E.24 Russian (RU) Keyboard ....................E-12 E.25 Turkish (TR) Keyboard ....................E-13 E.26 Yugoslavian (YU) Keyboard..................E-13 [CONFIDENTIAL] App-iv Satellite A130/ A135 Series Maintenance Manual...
  • Page 191 E.27 Danish (DM) Keyboard ....................E-14 E.28 Slovak (SV) Keyboard....................E-14 E.29 Swedish (SD) Keyboard ....................E-15 Appendix F Series Screw Torque List...................F-1 Appendix G Reliability......................G-1 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual App-v...
  • Page 192 DU keyboard ..................... E-11 Figure E-23 LI keyboard ....................... E-12 Figure E-24 RU keyboard...................... E-12 Figure E-25 TR keyboard ...................... E-13 Figure E-26 YU keyboard ..................... E-13 Figure E-27 DM keyboard..................... E-14 [CONFIDENTIAL] App-vi Satellite A130/ A135 Series Maintenance Manual...
  • Page 193 Figure E-28 SV keyboard.......................E-14 Figure E-29 SD keyboard.......................E-15 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual App-vii...
  • Page 194 Fingerprint Board Connector pin assignments (5-pin)........C-20 Table C-24 USB Board Connector pin assignments (10-pin) ..........C-20 Table C-25 VGA/B I/F pin assignments (200-pin) ............. C-21 Table D-1 Scan codes (set 1 and set 2).................D-1 [CONFIDENTIAL] App-viii Satellite A130/ A135 Series Maintenance Manual...
  • Page 195 Scan codes in overlay mode................D-7 Table D-6 No. 124 key scan codes..................D-7 Table D-7 No. 126 key scan codes..................D-8 Table F-1 Series Screw Torque List ..................F-1 Table G-1 MTBF........................G-1 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual App-ix...
  • Page 196 Appendices [CONFIDENTIAL] App-x Satellite A130/ A135 Series Maintenance Manual...

  • Page 197: Appendix A Handling The Lcd Module

    LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Note: The panel’s polarized surface is easily scratched and damaged, so handle it carefully. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 198 4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 199 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle grounding device when handling the module. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 200 8. Do not store the module at temperatures below its specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 201 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These materials can release gas that can damage the panel’s polarization. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 202 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...

  • Page 203: Appendix B Board Layout

    Appendix B Appendix B Board Layout B.1 System Board (FRDSY*) Top View JP34 JP21 JP33 JP5 JP32 [CONFIDENTIAL] Satellite A130/ 135 Series Maintenance Manual...
  • Page 204 B.2 System Board (FRDSY*) Button View JP12 JP11 JP14 PJP2 JP13 PJP1 JP15 JP16 JP18 JP19 JP17 JP24 JP25 JP20 JP20 JP31 JP10 JP28 JP29 [CONFIDENTIAL] Satellite A130/ 135 Series Maintenance Manual...
  • Page 205 Headphone out jack JP29 Microphone in jack JP30 ROM Socket JP31 2nd SATA HDD conn JP32 Finger Printer conn JP33 USB/B conn JP34 Speaker conn (Left) PJP1 Power core conn PJP2 Battery conn [CONFIDENTIAL] Satellite A130/ 135 Series Maintenance Manual...
  • Page 206 Table B-2 System board ICs (top and bottom) Number Name LAN RTL8101E/ RTL8111B North bridge 945GM/945PM Clock Generator ICS9LPRS325CKLFT EC KB910 South bridge ICH7 BIOS ROM LAN transformer Card bus controller TI PCI7412 HD codec AC861-VD-GR [CONFIDENTIAL] Satellite A130/ 135 Series Maintenance Manual...

  • Page 207: Appendix C Pin Assignments

    Table C-1 SODIMM I/F pin assignments (200-PIN) (1/4) Pin No. Signal name Pin No. Signal Name VREF DQS0# DQS0 DQ12 DQ13 DQS1# DQS1 CK0# DQ10 DQ14 DQ11 DQ15 DQ16 DQ20 DQ17 DQ21 DQS2# [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 208 Table C-1 SODIMM I/F pin assignments (200-PIN) (2/4) Pin No. Signal name Pin No. Signal Name DQS2 DQ18 DQ22 DQ19 DQ23 DQ24 DQ28 DQ25 DQ29 DQS3# DQS3 DQ26 DQ30 DQ27 DQ31 CKE0 NC/CKE1 NC/A15 NC/A14 A10/AP RAS# CAS# ODT0 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 209 DQ36 DQ33 DQ37 DQS4# DQS4 DQ38 DQ34 DQ39 DQ35 DQ44 DQ40 DQ45 DQ41 DQS5# DQS5 DQ42 DQ46 DQ43 DQ47 DQ48 DQ52 DQ49 DQ53 NC,TEST CK1# DQS6# DQS6 DQ50 DQ54 DQ51 DQ55 DQ56 DQ60 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 210 Table C-1 SODIMM I/F pin assignments (200-PIN) (4/4) Pin No. Signal name Pin No. Signal Name DQ57 DQ61 DQS7# DQS7 DQ58 DQ59 DQ62 DQ63 VDDSPD [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 211 JP13 Table C-2 RGB I/F pin assignments (15-pin) Pin No. Signal name Pin No. Signal Name CRT_R_L CRT_G_L CRT_B_L +CRT_VCC DSUB_12 CRT_HSYNC_L CRT_VSYNC_L DSUB_15 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 212 Pin No. Signal Name VCC3.3 VCC3.3 VCC3.3 VCC5 VCC5 VCC5 JP31 Table C-4 2nd HDD I/F pin assignments (22-pin) Pin No. Signal name Pin No. Signal Name VCC3.3 VCC3.3 VCC3.3 VCC5 VCC5 VCC5 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 213 IDE_DD9 IDE_DD6 IDE_DD10 IDE_DD5 IDE_DD11 IDE_DD4 IDE_DD12 IDE_DD3 IDE_DD13 IDE_DD2 IDE_DD14 IDE_DD1 IDE_DD15 IDE_DD0 IDE_DDREQ IDE_DIOR# IDE_DIOW# IDE_DIORDY IDE_DDACK# IDE_IRQ IDE_DA1 +5VCD IDE_DA0 IDE_DA2 IDE_DCS1# IDE_DCS3# SHDD_LED# +5VCD +5VS +5VCD +5VS +5VCD SD_CSEL [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 214 ADD8 ADD17 ADD13 ADD18 ADD14 ADD19 ADD20 READY ADD21 ADD16 ADD22 ADD15 ADD23 ADD12 ADD24 ADD7 ADD25 ADD6 VS2# ADD5 RESET ADD4 WAIT# ADD3 INPACK# ADD2 REG# ADD1 BVD2 ADD0 BVD1 DATA0 DATA8 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 215 Table C-6 PC Card I/F pin assignments (68-pin) (2/2) Pin No. Signal name Pin No. Signal Name DATA1 DATA9 DATA2 DATA10 CD2# [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 216 Table C-6 Mini-Express I I/F pin assignments (54-pin) Pin No. Signal name Pin No. Signal Name PCI_WAKE +3VS WLAN_DATA WLAN_CLK +1.5VS MINI_CLKREQ CLK_PCIE# CLK_PCIE XMIT_OFF# PLT_RST# PCIE_RXN2 +3VALW PCIE_RXP2 +1.5VS SMBCLK PCIE_TXN2 SMBDATA PCIE_TXP2 USB_N USB_P +1.5VS +3VS [CONFIDENTIAL] C-10 Satellite A130/ A135 Series Maintenance Manual...
  • Page 217 LCD_DATA LCD DATA DAC_BRIG Inverter Control signal TXOUT1- Panel Data Signals INVT_PWM Inverter Control signal TXOUT1+ Panel Data Signals DISPOFF# LCD back light Non-Connection INVPWR+B Inverter Control signal INVPWR+B Inverter Control signal [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual C-11...
  • Page 218 Signal Name +3VS +3VS KSO4 KSO2 KSI2 KSI1 KSO1 KSO0 KSI0 KSI3 KSO5 KSO6 KSI5 KSI6 KSI4 KSO12 KSO7 KSO3 KSI7 KSO13 KSO9 KSO8 KSO11 KSO10 KSO14 KSO15 +3VS CAPS_LED# PADS_LED# NUM_LED# [CONFIDENTIAL] C-12 Satellite A130/ A135 Series Maintenance Manual...
  • Page 219 Table C-12 Microphone I/F pin assignments (6-pin) Pin No. Signal name Pin No. Signal Name MIC-1 +AUD_VREF_J C.13 JP28 Table C-13 Head phone Connector pin assignments (6-pin) Pin No. Signal name Pin No. Signal Name INTSPK_L1 INTSPK_R1 NBA_PLUG [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual C-13...

  • Page 220: Appendix D Keyboard Scan/Character Codes

    Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 221 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 222 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl(L) Alt (L) Space ALT (R) Ctrl(R) ← Home ↑ ↓ PgUp PgDn → [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 223 5. * This key corresponds to key No. 42 in a 102-key model. 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 224 Shift key, scan codes are changed as listed below: With left Shift With right Shift Set 1 E0 AA ___________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12_________ E0 F0 59 E0 12____________ E0 59 [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 225 AA E0 12 E0 2F E0 F0 2F E0 F0 12 Table D-4 Scan codes with Fn keyiI Code set 1 Code set 2 Keytop Make Break Make Break L-CTRL L-ALT ARROW NUMERIC Scrl [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 226 Code set 2 Keytop Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl + Shift + Alt + [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 227 Table D-7 No.126 key scan code Key top Shift Code set 1 Code set 2 Make Make Pause Common Ctrl *: This key generates only make codes. [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...

  • Page 228: Appendix E Key Layout

    Appendix E Key Layout (GS) United Kingdom (UK) Keyboard Figure UK keyboard Spanish (SP) Keyboard Figure SP keyboard...
  • Page 229 Portuguese (PO) Keyboard Figure PO keyboardE.8 US-INTE (UI/INTE) Keyboard Figure US-INTE Keyboard...
  • Page 230 Germanic (GR) Keyboard Figure GR keyboard France (FR) Keyboard Figure FR keyboard...
  • Page 231 Italian (IT) Keyboard Figure IT keyboard Belgium (BE) Keyboard Figure BE keyboard...
  • Page 232 Czech (CZ) Keyboard Figure CZ keyboard Greek (GK) Keyboard Figure GK keyboard...
  • Page 233 Hebrew (HB) Keyboard Figure HB keyboard Hungary (HG) Keyboard Figure HG Keyboard...
  • Page 234 Norwegian (NW) Keyboard Figure NW keyboard Russian (RU) Keyboard Figure RU keyboard...
  • Page 235 Turkish (TR) Keyboard Figure TR keyboard Yugoslavian (YU) Keyboard Figure YU keyboard...
  • Page 236 Danish (DM) Keyboard Figure DM keyboard Swedish (SD) Keyboard Figure SD keyboard...
  • Page 237 Swiss (SW) Keyboard Figure SW keyboard Arabic (ARE) Keyboard Figure ARE keyboard...
  • Page 238 Slovakian (SV) Keyboard Figure SV keyboard Turkish-F (TR) Keyboard Figure TR –F keyboard...
  • Page 239 Scandinavian (ND) Keyboard Figure ND keyboard...

  • Page 240: Appendix F Series Screw Torque List

    2.5~3.0Kgf.cm KB TO LOG UP 2.5~3.0Kgf.cm MA000005WG0 M2.5*3 HDD DOOR-LOG LOW(Main HDD) 2.5~3.0Kgf.cm HDD DOOR-LOG LOW(Second HDD) 2.5~3.0Kgf.cm USB PCB TO LOW 2.5~3.0Kgf.cm MA0000062G0 M2.5*6 LOG LOW-LOG UP/R 2.5~3.0Kgf.cm LOG UP-MB-LOG LOW 2.5~3.0Kgf.cm [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...
  • Page 241 M 2.82D 5.05L MAFA94001G0 LOG LOW TO D SUB CONN(MB) 2.5~3.0Kgf.cm 6 5.0D NI * HDD BRK L TO HDD 2.0~2.5Kgf.cm MAAA43030G0 M3.0*3 HDD BRK R TO HDD 2.0~2.5Kgf.cm MA0000060G0 M2.0*3 ODD Module-ODD Lock 1.5~2.0Kgf.cm [CONFIDENTIAL] Satellite A130/ A135 Series Maintenance Manual...

  • Page 242: Appendix G Reliability

    Appendix G Reliability The following table shows MTBF (Mean Time Between Failures) for each component. Table G-1 MTBF Component Time (hours) 10,000 Keyboard 60,000 300,000 Removable FDD 30,000 Optical (DVD/CD) drive 60,000 AC adaptor 60,000 [CONFIDENTIAL] Satellite A130/ 135 Series Maintenance Manual...

This manual is also suitable for:

Satellite a135

Table of Contents