Belkin F5D9630UK4A User Manual page 76

Troubleshooting Troubleshooting
4.
For a home or small business user, select "WPA-PSK" under
"Network Administration".
Note:
Select WPA (with radius server) if you are using this
computer to connect to a corporate network that supports an
authentication server such as a radius server. Please consult
your network administrator for further information.
5.
Select "TKIP" or "AES" under "Date Encryption". This setting will
have to be identical to the wireless router or access point that
you set up.
6.
Type in your encryption key in the "Network Key" box.
Important:
to 63 characters and can be letters, numbers, or symbols. This
same key must be used on all of the clients that you set up.
7.
Click "OK" to apply settings.
What is the difference between 802.11b, 802.11g, G+
MIMO, and Pre-N?
Currently there are four levels of wireless networking standards, which
transmit data at very different maximum speeds. Each is based on
the designation 802.11(x), so named by the IEEE, the board that is
responsible for certifying networking standards. The most common
wireless networking standard, 802.11b, transmits information at 11Mbps;
802.11a and 802.11g work at 54Mbps; G+ MIMO works at 54Mbps; and
Pre-N works at 108Mbps.
Enter your pre-shared key. This can be from eight
74 74