Above-Listed Setexamplesenv.cmd Script Modified To Boot Weblogic Server 7.0 - BEA WebLogic Server 7 Upgrade Manual

Upgrading the WebLogic 6.1 Service Pack 2 Examples Server to WebLogic Server 7.0
set PATH=%WL_HOME%\bin;%JAVA_HOME%\bin;%PATH%
@echo.
@echo Your environment has been set.
:finish

above-listed setExamplesEnv.cmd script modified to boot WebLogic Server 7.0

@echo on
@rem This script should be used to set up your environment for
@rem compiling and running the examples included with WebLogic
@rem Server. It contains the following variables:
@rem
@rem WL_HOME
WebLogic
@rem
@rem JAVA_HOME - Determines the version of Java used to compile
@rem
@rem
@rem
@rem
@rem
Windows NT.
@rem
@rem When setting these variables below, please use short file
@rem names(8.3).
@rem To display short (MS-DOS) filenames, use "dir /x". File
@rem names with spaces will break this script.
@rem
@rem jDriver for Oracle users: This script assumes that native
libraries
@rem required for jDriver for Oracle have been installed in the
proper
@rem location and that your system PATH variable has been set
appropriately.
@rem For additional information, refer to Installing and Setting
up WebLogic
@rem Server (/install/index.html in your local documentation set
or on the
@rem Internet at
http://e-docs.bea.com/wls/docs61/install/index.html).
@rem Set user-defined variables.
@rem changed: set WL_HOME=C:\bea61sp2\wlserver6.1
1. Set the
classes.
set WL61_HOME=C:\bea61sp2\wlserver6.1
- This must point to the root directory of your
installation.
and run examples. This variable must point to the
root directory of a complete JDK installation. See
the WebLogic platform support page
(http://e-docs.bea.com/wls/platforms/index.html)
for an up-to-date list of supported JVMs on
variable so that you can access your WebLogic Server 6.1
WL61_HOME
BEA WebLogic Server 7.0 Upgrade Guide B-33