Page 1
20” Digital / Analog Television built-in DVD Player Owner’s Manual V7PFDVD20 POWER OPEN/CLOSE VIDEO - AUDIO - HEADPHONE VOLUME STOP PLAY SELECT TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
NTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS AP- PLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fi re or electric shock. Never spill liquid of any kind on the TV. SERVICING - Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
NTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...
NTRODUCTION Features • DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. • Program Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen.
Remote Control Function POWERy y button (p11) Press to turn the unit on and off. PICTURE/SLEEP button (p15 / p16) • Press to adjust the picture quality. • Press to activate the sleep timer. Number buttons (p13) Press to select channels. +10/+100 button •...
NTRODUCTION Control Panel POWER VOLUME STOP PLAY SELECT POWER VOLUME STOP PLAY SELECT Rear Panel ANT. COAXIAL HEADPHONE jack Headphone connection for personal listening. AUDIO input jacks (p10) RCA audio cable connection for an external device. VIDEO input jack (p10) RCA video cable connection for an external device.
ONNECTION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
ONNECTION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [Video Cable Connection] When you connect this unit to an external device, use the audio/video input jacks on the front of this unit. Make the connection as illustrated below. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack.
NITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and “AUTO PRESET CH”, which automatically scans and memorizes viewable channels.
NITIAL SETTING Auto Channel Scan If you switch wires (e.g., between antenna and CATV) or if you move the unit to a diff erent area after the initial setting, or if you recover the DTV channel you deleted, you will need to perform auto channel scan. Before you begin: Make sure if the unit is connected to antenna or cable.
ATCHING TV Channel Selection Select channels by pressing [CH. K / L] or [the Number buttons]. • To select the memorized channels, use [CH. K / L] or [the Number buttons]. • To select the non-memorized channels, use [the Number buttons]. To use [the Number buttons] - When selecting analog channel 12 - When selecting digital channel 12-1...
ATCHING TV Switching Each Mode You can easily switch with the remote control to the DTV (ATSC), TV (NTSC) and DVD mode or to access an external device when they are connected to the unit. Press [SELECT] repeatedly to cycle through the input mode.
TV Screen Display Mode 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. Press [SET-UP] to display the main menu. Use [Cursor K / L] to select “DTV SETUP”, then press [ENTER].
PTIONAL SETTING Channel Add/Delete The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels. Press [SET-UP] to display the main menu. Use [Cursor K / L] to select “CHANNEL SETUP”, then press [ENTER].
Closed Caption You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. Press [SET-UP] to display the main menu. Use [Cursor K / L] to select “CAPTION”, then press [ENTER] repeatedly to change the setting.
PTIONAL SETTING DTV Closed Caption In addition to the basic closed caption described on page 17, DTV has its own closed caption called DTVCC. Use this menu to change the settings for DTVCC. Press [SET-UP] to display the main menu. Use [Cursor K / L] to select “DTV SETUP“, then press [ENTER] .
• CAPTION SIZE Closed captioning font size can be changed as below. • FONT STYLE Font style of the displayed caption can be switched as below. • CHARACTER EDGE Edge type of the displayed caption can be switched as below. •...
Page 20
PTIONAL SETTING A. TV Rating A. TV Rating Use [Cursor K / L] to select “TV RATING“, then press [ENTER]. e.g.) digital TV mode TV RATING MPAA RATING DOWNLOADABLE RATING CHANGE PASSWORD Use [Cursor K / L ] to select the desired rating, then press [ENTER] repeatedly to switch between “VIEW”...
Page 21
B. MPAA Rating B. MPAA Rating MPAA Rating is the rating system created by MPAA (Motion Picture Associa- tion of America). Use [Cursor K / L] to select “MPAA RATING”, then press [ENTER]. e.g.) digital TV mode --- V--CHIP SETUP --- TV RATING MPAA RATING DOWNLOADABLE RATING...
These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Playback Before you begin: Turn on the amplifi er and any other device which is connected to this unit. Make sure the external audio receiver (not supplied) are set to the correct input mode.
PERATING DVD Step-by-step Playback Each time you [PAUSE F] in the pause mode, the disc goes forward one frame at a time. To continue playback, press [PLAY B]. Note: • Set “STILL MODE” to “FIELD” in “DISPLAY“ menu if pictures in the pause mode are blurred.
Search Functions Chapter / Title Search Chapter / Title Search Using [MODE] During playback, press [MODE] repeatedly until “ “ appears. • If you want to perform the title search, press [Cursor K / L] repeatedly until “ Press [the Number buttons] to select your desired chapter or title within 60 seconds.
PERATING DVD Time Search Time Search During playback, press [MODE] repeatedly until “ “ / “ “ appears. e.g.) DVD Use [Cursor K / L] repeatedly until “ Press [the Number buttons] to select your desired time lapse within 60 seconds. Playback will start automatically from the time you selected.
Note: • Repeat setting (except “ALL“) will be cleared when moving to another title, chapter or track. • During programmed playback, repeat setting will be effective for the tracks in the program. • Repeat playback or repeat A-B playback may not available with some discs.
PERATING DVD On-screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. appears only when multi- angle is available on the DVD current playback status 11/16 0:00:00 - 0:03:30 remaining time of the current chapter elapsed time of the current chapter...
Special Settings Subtitle Language Subtitle Language This unit allows you to select a subtitle language (if available) during DVD playback. During playback, press [MODE] repeatedly until “ “ appears. Use [Cursor K / L] repeatedly until your desired language appears. 1.ENG/6 (SUBTITLE) •...
Page 30
PERATING DVD Black Level Setting Black Level Setting Adjust the black level to make the dark areas of the TV picture brighter. During playback, press [MODE] repeatedly until “ “ appears. Use [Cursor K / L] to adjust the black level. ON : Makes the dark areas brighter.
Page 31
Marker Setup Marker Setup This feature allows you to assign a specifi c point on a disc to be called back later. To set a marker During playback, press [MODE] repeatedly until “ ” / “ ” appears. e.g.) DVD /12 (SEARCH) Use [Cursor K / L ] repeatedly until marker search menu appears.
VD SETTING Settings are only effective when the unit is in DVD mode and any discs should not be played back. QUICK MENU AT A GLANCE QUICK MENU AT A GLANCE If you make setting for “TV MODE“ or “DOLBY DIGITAL”, you can also enter from the “QUICK“...
Display Setting You can change the TV aspect ratio and still mode clarity in “DISPLAY” menu. In stop mode, press [SET-UP] to display “SETUP” menu. Use [Cursor K / L ] to select “CUSTOM”, then press [ENTER]. SETUP QUICK CUSTOM INITIALIZE SELECT: K / L EXIT:SETUP...
VD SETTING DVD Audio Setting Choose the appropriate audio settings for your device. It only aff ects during the playback of DVD. In stop mode, press [SET-UP] to display “SETUP” menu. Use [Cursor K / L ] to select “CUSTOM”, then press [ENTER].
Parental Setting Parental setting prevents your children from viewing inappropriate materi- als. (Password protected.) Playback will stop if the ratings exceed the levels you set. In stop mode, press [SET-UP] to display “SETUP” menu. Use [Cursor K / L ] to select “CUSTOM”, then press [ENTER].
VD SETTING Others You can change the other functions. In stop mode, press [SET-UP] to display “SETUP” menu. Use [Cursor K / L ] to select “CUSTOM”, then press [ENTER]. SETUP QUICK CUSTOM INITIALIZE SELECT: K / L EXIT:SETUP Use [Cursor K / L ] to select “OTHERS”, then press [ENTER].
Reset to the Default Setting You can reset all the settings except for the parental setting and on-screen menu language. In stop mode, press [SET-UP] to display “SETUP” menu. Use [Cursor K / L ] to select “INITIALIZE”, then press [ENTER].
ROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this owner’s manual, check the following chart once before calling for service. Symptom No power No picture or sound No color Sound OK, picture poor Picture distorted Weak picture Lines or streaks in picture...
Page 39
Symptom The entered channel number changes automatically Remote control does not work Misspelled captions are dis- played. Captions are not entirely dis- played, or captions are delayed behind the dialogue. Captions are displayed as a white box. No caption is displayed in the Closed Caption-supported program.
NFORMATION Glossary ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as its height).
Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations. CATV channel TV Display CATV channel...
This form describes the protection You will have under this Limited Warranty. LIMITED WARRANTY PERIOD: This Limited Warranty begins on the date of purchase of the Covered Product and continues for a period of six months. WHAT IS COVERED: Meijer will pay the cost of labor and repair or replacement parts in the event Your Covered Product fails to operate as a result of a mechanical or electrical failure caused by defects in workmanship and/or materials.