Advertisement
Quick Links
Disclaimer and warranty
Important disclaimer, please read!
Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license
agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor
any of its agents, distributors, dealers or vendors shall be liable for damages.
IN NO EVENT SHALL DICE ELECTRONICS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING
SOFTWARE OR ITS DOCUMENTATION.
For internal use only. Do not submerge or expose to water or other fluids. DICE G2 cradle is NOT water proof and it will be damaged by water.
You must properly insulate its casing if your installation environment may subject the unit to water, such as a convertible vehicle.
Keep away from children! DICE G2 cradle can be broken, or disassembled, and components may become loose from vibration and heat.
Small components and packaging materials may become choking hazard when handled by children.
Warning! Never place any objects directly into the path of an airbag. DICE Electronics does not accept any responsibility for any damage or
injury as a result of using this product. Exercise good judgment and keep your eyes on the road at all times!
DICE logo is a trademark of DICE Electronics, LLC. Kuda is a trademark of KUDA Group. iGrip is a trademark of HR GmbH & Co. KG. ProClip
is a trademark of ProClip USA Inc. The Made for iPod logo is a trademark of Apple Inc. The Works with iPhone logo is a trademark of Apple Inc.
Apple iPod is not included in the package.
Warranty and Support
If you experience any problems or need help, please contact you local dealer or call DICE Electronics, LLC. At 888-342-3999 or visit us at
http://diceelectronics.com/product-support
Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its
authorized agents, distributors and dealers. The warranty period begins the day a product is purchased by the end user. Products found to be
defective during the warranty period will either be repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized
attempt of repair or alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or finish. A DICE
product specialist must determine that a defect is present in the product and issue an RMA. Be sure that all wiring is connected as described
in the user manual and all related equipment is functioning properly. DICE Electronics disclaims any liability for other incurred damages
resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this warranty.
PLEASE NOTE: International customers requiring a product replacement, please contact the dealer your product was purchased from!
6
Mounting option
These holes are designed to allow you to
screw the cradle base to AMPS standard
mounts (ProClip
Use the mounting screws (x4)
These holes are designed to fit
included with the G2 cradle to
vehicle mounts from iGrip
.
TM
screw the cradle to AMPS standard
mounts.
Connect the Cradle
IMPORTANT!
Pinout on 1/8" Jack connector:
Left
audio GND
USB mini B
connection
Right
Video
audio
Left
Optional cable
Right
Video*
USB type B
* Video output only works when connected to
connector
an iPod video accessory.
1
DICE G2 cradle
USB cradle for iPod & iPhone
Model: DCR-150-USB
Installation Guide/User Manual
Table of contents
Disclaimer and warranty
Compatible iPod & iPhone
G2 cradle contents
...............................................3
Choose the correct holder
Installation
............................................................5
Mounting option
....................................................6
Connect the cradle
...............................................7
Long base installation
...........................................8
Adjusting the angle
...............................................9
5
Installation
TM
, Kuda
TM
, etc).
Slide the correct holder
onto the cradle until it
clicks.
7
Long base Installation
Factory or Aftermarket
radio with USB iPod port
or
USB cigarette
lighter charger
or
If the long base will fit your car interior more appropriately than the short one,
then please follow the illustration to attach the long base to the cradle. Turn the
base clockwise to tighten the base to the cradle.
DICE Media Bridge or
FM-RDS USB Pro
Compatible iPod & iPhone
......................................1
...................................2
....................................4
Slide the iPhone/iPod
into the holder
G2 cradle DCR-150 contents
DCR-150 cradle
additional holders x6
with regular base and
iPhone 4 holder x1
4
mounting screws x4
USB mini B connector x1
DCR-150 REV. 080510
4
Choose the correct holder
Compatible iPhone/iPod model can be found here.
8
Adjusting the angle
3
long base x1
Each holder is designed for a different
iPhone/iPod model. Identify the holder
by the printed text on the back of the
holder and choose the correct holder
for your iPhone/iPod.
9
To adjust the angle of the cradle, first slide
off the holder, then loosen the set screw
enough for the cradle to move freely. When
you are done adjusting the angle, hold the
base and tighten the set screw, and slide
the holder back to its place. DO NOT
OVER TIGHTEN!
Advertisement
