1. Manuals
  2. Brands
  3. SV2000 Manuals
  4. DVD Recorder
  5. SV2000 WV10D6
  6. Owner's manual

SV2000 WV10D6 Owner's Manual

Funai dvd recorder owners manual wv10d6
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
Recordable disc
• We strongly recommend for good recording quality:
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x
• Discs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4

DVD Recorder

If you need additional operating assistance after reading this owner's manual or
or visit our web site at http://www.funai-corp.com
Connection to a TV (Before you use this unit, you need to complete connections.)
If your TV has AUDIO/VIDEO input jacks, see the section "Connections" on pages 13–15. If not, it is still possible to
connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case,
follow the instructions below.
1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then
connect the RF cable to the ANTENNA IN jack of this unit.
2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked "ANT IN") by the RF cable.
3) Connect your RF modulator to your TV by another RF cable.
4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.
5) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your
RF modulator has a Modulator/Antenna switch, set it according to your RF modulator's manual.
6) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to.
For more details, follow the instructions supplied with the RF modulator.
Antenna
Cable
TV signal
or
1
STEREO AUDIO/VIDEO
RF Modulator
(commercially available)
To record a program easily, refer to "Easy DVD recording" on pages 16-17 after connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
Please read before using this equipment.
to order replacement accessories, please call
TOLL FREE : 1-800-518-1180
(Back of This Unit)
COMPONENT
VIDEO IN
VIDEO OUTPUT
VIDEO OUT
IN
S-VIDEO
Y
IN
OUT
L
L
OUT
P
/C
B
B
R
R
ANTENNA AUDIO IN
P
/C
R
R
AUDIO OUT
(E1)
2
5
RF cable
Set channel 3 or 4.
(supplied)
AC 120V
ANT IN
CHANNEL
TO TV
3
4
WV10D6
4
Audio/Video cables
(supplied)
AUDIO IN
VIDEO IN
R
L
Antenna in jack
3
RF cable
(commercially available)
x
6
Turn on your TV
and select channel
3 or 4.
(Back of TV)
Note
• The quality of
picture may
become poor if this
unit is connected to
an RF modulator.

Advertisement

Table of Contents
loading

Summary of Contents for SV2000 SV2000 WV10D6

  • Page 1: Dvd Recorder

    If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call or visit our web site at http://www.funai-corp.com Connection to a TV (Before you use this unit, you need to complete connections.) If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available).

  • Page 2: Before You Start

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
  • Page 4 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. •...
  • Page 5 Maintenance SERVICING • Please refer to relevant topics on “Troubleshooting” on pages 71-74 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

  • Page 6: Table Of Contents

    Before you start ....2 Precautions ....... 2 Important Safeguards .

  • Page 7: Features

    This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Recording This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD- R, which is available for recording once.

  • Page 8: Functional Overview

    Front Panel * The unit can also be turned on by pressing this button. Disc tray Place a disc when opening the disc tray. OPEN/CLOSE A button* Press to open or close the disc tray. CHANNEL L / K buttons Press to change the channel up and down.
  • Page 9 Functional overview (cont’d) Rear Panel VIDEO IN ANTENNA AUDIO IN (E1) 1. ANTENNA IN jack Use to connect an antenna. 2. VIDEO IN jack (EXT1) Use to connect external equipment with a stand- ard video cable. 3. VIDEO OUT jack Use to connect a TV monitor, AV receiver or other equipment with a standard video cable.
  • Page 10 Functional overview (cont’d) Remote Control STANDBY-ON .@/: PQRS DISPLAY TITLE REC MODE RAPID PLAY ( * ) The unit can also be turned on by press- ing this button. 1. ZOOM button During playback, press to enlarge the picture on the screen.

  • Page 11: Installing Batteries In The Remote Control

    Functional overview (cont’d) Installing batteries in the remote control Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: •...

  • Page 12: Setup Menus

    Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu. Then using the menu. These menus provide entries to all main functions of the unit. Setup Required Settings Playback Display Recording Clock Channel Disc Edit 1. Required Settings: To set up the required settings.

  • Page 13: Connections

    • Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details.

  • Page 14: Connection To A Cable Box Or Satellite Box

    Connection to a cable box or satellite box (Cable box or Cable Satellite box) TV signal RF cable (Commercially Connect available) With this setup: • You can record any unscrambled channel by selecting the channel on the cable box or satellite box.

  • Page 15: Connection To An Audio System

    Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit Note •...

  • Page 16: Getting Started

    The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit with the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs.
  • Page 17 Easy DVD recording (cont’d) Step 5: Select the desired channel. STANDBY-ON OPEN/CLOSE TIMER ZOOM PROG. .@/: PQRS WXYZ REPEAT DISPLAY SPACE CLEAR SETUP .@/: PQRS WXYZ REPEAT CH 12 Hint 1: Play the recorded contents You can select the title you want to play from a displayed title list, and immediately start to play.

  • Page 18: Initial Setting

    Turn on this unit for the first time, you need to follow these steps. Press [STANDBY-ON]. Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 13. TV's original remote control TV / VIDEO *This button can be labeled as...

  • Page 19: Adding/Deleting Channels

    To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press [1], [1], [7]) •...

  • Page 20: Selecting The Tv Stereo Or Sap

    Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. Notes on TV channel audio •...

  • Page 21: Setting The Clock

    Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 22. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct.

  • Page 22: Manual Clock Setting

    Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. Clock Setting ---- / -- / ---- ( ---- ) -- : -- -- Press [OK] again.

  • Page 23: Setting The Daylight Saving Time

    Setting the Daylight Saving Time When “Daylight Saving Time” is ON, the unit clock will automati- cally move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “ON” has been selected as the default.

  • Page 24: Recording

    Information on DVD recording Information This unit can record to DVD+RW, DVD-RW, DVD+R and DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. This unit will record DVD+VR mode automatically. DVD-RW/DVD-R disc will be recorded in the DVD+VR mode automatically in this unit.

  • Page 25: Making Discs Playable In Other Dvd Player (Finalize/Make Edits Compatible)

    Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to page 36.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on other units after editing.

  • Page 26: Before Recording

    Replacing disc menu DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units.

  • Page 27: Basic Recording

    DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD- DVD-RW DVD-RW Follow the steps below to record TV programs. Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A]. The disc tray will open. Insert your disc with its label facing up.

  • Page 28: One-Touch Timer Recording

    One-touch Timer Recording DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode.

  • Page 29: Timer Recording

    DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming.
  • Page 30 Checking, canceling, or correcting the timer programming information Press [STANDBY-ON]. TIMER REC indicator will be off on the front panel. Press [TIMER PROG.]. Timer Programming Date Start Mode 1. JAN/01 12:57AM 1:57AM CH 8 Timer Programming list will appear. Check the information on the list you will need.

  • Page 31: Hints For Timer Recording

    Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not on the tray, TIMER REC indicator flashes and Timer Recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record.

  • Page 32: Overwriting An Existing Title

    Overwriting from the beginning of the title DVD+RW DVD+ DVD+RW DVD-RW DVD- DVD-RW You can overwrite the existing title from the beginning. Press [STANDBY-ON]. Make sure that the TV input is set on the unit. Load the disc that includes a title to be overwritten.

  • Page 33: Hints For Overwriting

    Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A...

  • Page 34: Settings For An External Source

    Settings for an external source Connection to an external source DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection.

  • Page 35: Recording From An External Source

    Settings for an external source (cont’d) Recording from an external source DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW Before recording from an external source, see the instructions for the connection on page 34. 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected.

  • Page 36: Playing The Discs In Other Dvd Players

    Playing the discs in other DVD players Finalizing a disc DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization.

  • Page 37: Auto Finalizing

    Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space.

  • Page 38: Playing Discs

    Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit.

  • Page 39: Basic Playback

    Playback DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- Press [STANDBY-ON ]. Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] . The disc tray will open. Insert your disc with its label fac- ing up.

  • Page 40: Playing Mp3 Disc

    Video Video DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD-R DVD-R DVD-R DVD-RW DVD- DVD-RW Press [STANDBY-ON]. Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open.

  • Page 41: Playing Discs Using The Disc Menu

    Playing discs using the disc menu DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection.

  • Page 42: Special Playback

    Resume play DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R Video Video DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R You can resume play from where you stopped playing the disc last. During playback, press [STOP C]. The resume message will appear. Resume ON Press [PLAY B].

  • Page 43: Rapid Play

    Rapid play DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R Video Video DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal...

  • Page 44: Zoom

    Zoom DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R Video Video DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R Video CD Video CD Video CD During playback, press [DISPLAY] or [ZOOM]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select .

  • Page 45: Search

    Title/Chapter search DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R Video Video DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current title or chap- ter and move to the next.

  • Page 46: Track Search

    Track search Video CD Video CD Video CD Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track.

  • Page 47: Repeat/Random/Program Playback

    Repeat/Random/Program playback Repeat playback DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R Video Video DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R During playback, press [DISPLAY] or [REPEAT]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select .

  • Page 48: Program Playback

    Repeat/Random/Program playback (cont’d) Program playback Video CD Video CD Video CD You can program the disc to play in your desired order. Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear. Using [K / L], select “Program Play”.

  • Page 49: Switching Audio Soundtrack

    Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V Video CD Video CD Video CD When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during playback.

  • Page 50: Switching Camera Angles

    Selecting the format of audio and video (cont’d) Switching camera angles DVD-V DVD-V DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes.

  • Page 51: Editing

    Information on disc editing Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. Press [TITLE].

  • Page 52: Editing Discs

    Deleting titles DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to record on will be increased.

  • Page 53: Putting Names On Titles

    Putting names on titles DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- DVD-R DVD-R DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. Follow steps 1 to 3 in “Deleting titles”...

  • Page 54: Setting Chapter Marks

    Setting chapter marks DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Follow steps 1 to 3 in “Deleting titles” on page 52 to display the Edit menu.
  • Page 55 Clearing chapter marks (cont’d) Press [RETURN ] twice to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. To delete all chapter marks: Follow steps 1 to 3 in “Deleting titles” on page 52 to display the Edit menu.

  • Page 56: Hiding Chapters

    Hiding chapters DVD-RW DVD+RW DVD+ DVD+RW DVD+R DVD+R DVD+R DVD- DVD-RW You can hide chapters from the title list. Hidden chapters are skipped during playback. Follow steps 1 to 3 in “Deleting titles” on page 52 to display the Edit menu. Using [K / L]] , select “Current Chapter”.

  • Page 57: Setting Pictures For Thumbnails

    Setting pictures for thumbnails DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD- You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.

  • Page 58: Dividing A Title

    Dividing a title DVD-RW DVD+RW DVD+ DVD+RW DVD- DVD-RW You can divide one title into two new titles. Follow steps 1 to 3 in “Deleting titles”on page 52 to display the Edit menu. Use [PREV H], [NEXT G], [REV E], [FWD D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title.

  • Page 59: Editing Discs (Setup Menu)

    Editing discs (Setup menu) Putting name on disc DVD+ DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD-RW DVD- DVD-RW You can put title names on the titles and change the names from this menu. Press [STOP C] if you are playing a disc. Press [SETUP].

  • Page 60: Setting Or Releasing Disc Protect

    Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD-RW DVD+RW DVD+RW DVD+ DVD+R DVD+R DVD+R DVD- DVD-RW To prevent accidental editing, or erasing the titles, you can protect them. Follow steps 1 to 2 in “Putting name on disc” on page 59 to display the Disc Edit menu.
  • Page 61 Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont’d) Releasing disc from protect Follow steps 1 to 2 in “Putting name on disc” on page 59 to display the Disc Edit menu. When inserting <DVD+RW> disc. Disc Edit Edit Disc Name Disc Protect ON Erase Disc...

  • Page 62: Erasing Disc

    Editing discs (Setup menu) (cont’d) Erasing disc Video DVD+RW DVD+RW DVD+ DVD-RW DVD-RW DVD- DVD-RW DVD-RW DVD- You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc it will be recorded to DVD+VR automatically.

  • Page 63: Changing The Setup Menu

    Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 64-65 Audio Language Subtitle Language 2.Display setting OSD Language...

  • Page 64: Language Setting

    Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. Using [K / L], select “Language”. Press [OK]. Language menu will appear. Using [K / L], desired item. Press [OK]. Disc Menu Language (Default : English) Set the language for Disc Menu.

  • Page 65: Display Setting

    Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Display”. Press [OK]. Display menu will appear.

  • Page 66: Audio Setting

    Changing the Setup menu Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. Display OSD Language English Angle Icon Screen Saver 10 minutes Press [SETUP] to exit. Choose the appropriate Audio settings for your external equipment.
  • Page 67 Changing the Setup menu Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Digital Out - PCM Your setting will be activated. 48kHz 96kHz 48kHz 96kHz Settings for Dolby Digital (Default : Stream) •...

  • Page 68: Video Setting

    Changing the Setup menu Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. Press [SETUP].

  • Page 69: Settings For Parental Lock Level

    Changing the Setup menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

  • Page 70: Settings For Pbc (Playback Control)

    Changing the Setup menu Settings for Parental lock level (cont’d) A password has been set already. Parental Lock Password Input * * * * • Using the Number buttons, enter the current password. Press [SETUP] to exit. Note • Press [CLEAR] to erase numbers entered incorrectly. •...

  • Page 71: Others

    Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Power The power does not turn on.
  • Page 72 Symptom Playback The disc does not play. Playback image freezes for a second. The disc does not start playback from the beginning. The unit starts playing from the disc automatically. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. The language for the sound track cannot be changed.
  • Page 73 Troubleshooting (cont’d) Symptom Others The unit does not operate properly. The disc tray does not open when you press [OPEN/CLOSE A]. “Repairing” appears on the TV screen. Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.

  • Page 74: Language Code

    Error message Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Power Calibration Area is full. Recording Error This disc is already finalized. Recording Error The disc has a different menu layout.

  • Page 75: Glossary

    Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.

  • Page 76: Specifications

    General System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format Recording Recording format Recordable discs Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format Tuner Receivable channels CATV Input/Output VHF/UHF antenna input/output terminal...

  • Page 77: Español

    Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos.
  • Page 78 Fácil grabación de DVD (cont.) Paso 5: Eleccione el canal des eado. STANDBY-ON OPEN/CLOSE TIMER ZOOM PROG. .@/: PQRS WXYZ REPEAT DISPLAY SPACE CLEAR SETUP PQRS WXYZ REPEAT CH 12 Sugerencia 1: Reproduzca el contenido grabado Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente.
  • Page 79 MEMO...

  • Page 80: Limited Warranty

    FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents