Canon REBEL SL1 EOS 100D Instruction Manual page 74

f'_ Printing
:: Set the date and file number
imprinting.
Set them if necessary.
Select <_>, then press <SET>.
Set the print settings as desired, then
press <SET >.
Set the number of copies.
Set it if necessary.
Select <_j>, then press <SET>.
Set the number of copies, then press
<SET>.
.... Start printing.
Select [Print],then press<SET>.
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.
Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.289) is applied, it may take longer to print the
image.
To stop the printing, press <SET> while [Stop] is displayed, then select
[OK].
If you execute [Clear all camera settings] (p.227), all the settings wilt
revert to their defaults.
287