Canon POWERSHOT ELPH 1301S User Manual page 98

9
After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <A> button. The recent target device is listed first, so you can
easily connect again by pressing the <A><v> buttons to choose it. To add
a new device, display the device selection screen by pressing the <_><_.>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <MENU> button,
and on the [?_] tab, choose [Wi-Fi Settings] > [Target History] > [Offj.
To add multiple cameras, repeat the above procedures starting from step 1.
Once a camera is added, the camera nickname wiii be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera nickname
from the list.
Configure computer settings for the connection, add the computer as a
connection destination, and transfer images to the computer wirelessly
using the software CameraWindow as follows.
o When connected to a computer, the camera is used to establish the
connection and then the computer (software CameraWindow) is used to
transfer images.
Preparing_ to Register a Computer
Prepare to register a computer.
@ Checking Your Computer Environment
For computer environments that allow Wi-Fi connection with a camera, refer
to "System Requirements" (_{_ 19).
Additionally, the software CameraWindow must be installed (/_ 19).
b _ Windows 7 Starter and Home Basic editions are not supported.
Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For further details, see the following website.
http:/Igo.microsoftcom/fwlink/?Linkld=159730
@@
98