Other Settings; Auto Preset Ch - iLO IWT3206 Owner's Manual

O
THER SETTINGS

AUTO PRESET CH

If you switch wires (e.g. between antenna and
CATV) or if you move the TV to a different area
after the initial setting, you will need to perform
AUTO PRESET CH again. This function lets you
easily select the receivable channels with [CH K / L ]
and the TV memorizes them even if you switch
wires.
POWER
VOL
n
CH K / L
1
4
7
-/ENT
MUTE
INFO
NOTE:
• Make sure if the TV is connected to antenna or cable.
When aerial antenna is connected, select "AUTO PRE-
SET CH (TV)" or "(TV/DTV)" at step 4. When connected
to CATV, select "AUTO PRESET CH (CATV)".
TV
When scanning TV or CATV
1
Select analog mode by pressing [DTV/TV].
2
Display the menu screen.
• Press [MENU].
The following menu screen is displayed.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
3
Select "CHANNEL SET".
• Using [CH K / L ], select "CHANNEL SET".
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
• Press [VOL X ].
28
EN
DTV/TV
DTV/TV
VOL X
o
VOL
CH m
p
2 3
5 6
8 9
0 +100
MENU
SLEEP MENU
AUDIO
INPUT
SELECT
4
For TV channels
• Using [CH K / L ], select
"AUTO PRESET CH(TV)".
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
• Press [VOL X ].
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH(TV)
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed.
4
For CATV channels
• Using [CH K / L ], select "AUTO PRESET
CH(CATV)".
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
• Press [VOL X ].
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH(CATV)
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
CATV will be displayed.