Preparation For Use - FUNAI Symphonic CSF420G Owner's Manual

PREPARATION FOR USE

CONNECTIONS
Plug the incoming cable into the ANT. IN jack on the rear of the TV.
Cable
Antenna
OR
TV signal
Incoming cable from home Antenna /
Cable Company (No Cable Box)
Cable Box or
Satellite Box*
OR
OU T
IN
Incoming cable from Cable
Company or Satellite Antenna
Cables not included
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Note:
For your safety and to avoid damages to the unit, unplug the antenna cable from the
●
ANT. IN jack before moving the unit.
[EXTERNAL CONNECTION]
VIDEO1 input (Rear)
ex.
(OUT)
(OUT)
Video Cassette Recorder
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
VIDEO2 input (Front)
ex.
Video Camera Video Game
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by
pressing [INPUT SELECT] on the remote control. The input mode changes by pressing the
button as follows:
TV channel
INPUT
SELECT
• To use the jacks on the rear of the TV, select "VIDEO1".
• To use the jacks on the front of the TV, select "VIDEO2".
UHF/VHF Rod Antenna
(Not supplied)
Rear of this TV
ANT. IN
*Note (DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
S-Video Cable
(not supplied)
L
(IN)
AUDIO IN
R
Audio Cable
(not supplied)
Audio Cable
(not supplied)
(OUT)
(OUT)
(IN)
Video Cable
(not supplied)
VIDEO L AUDIO
Front of this TV
VIDEO1 (Rear) VIDEO2 (Front)
INSTALLING THE BATTERIES
1
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
OPERATIONS
REMOTE CONTROL AND FRONT PANEL FUNCTION
IR transmitter
To send infrared ray (IR) signal
POWER button
To turn TV on/off
Channel number buttons
Press two digits to directly access the
desired channel. Remember to press
a "0" before a single digit channel.
CH(ANNEL) K K / L L buttons
To select channels and move
up/down through menu items
To view on-screen menu
Rear of this TV
Note:
(IN)
You can test if the remote control sends out the infrared signal with an AM radio.
●
(Refer to "TROUBLESHOOTING GUIDE".)
S-VIDEO
MENU VOLUME CHANNEL
VIDEO L AUDIO R
HEADPHONE
VIDEO
L
(IN)
R
Note:
If some digits appear in the corner of the screen when the unit is turned on for the first time,
●
press [POWER] without unplugging the power cord.
SLEEP TIMER SETTING
1
1
SLEEP
2 2
SLEEP
repeatedly
The time increases by 10 minutes
up to 90.
2
3
GAME SLEEP
POWER
DISPLAY
1 2 3
4 5 6
CHANNEL
RETURN
7 8 9
0 +100
INPUT
SELECT
CH
VOL VOL
CH
MUTE
MENU
MENU button
POWER
MENU VOLUME CHANNEL POWER
AUDIO R HEADPHONE
VOLUME
To adjust volume
MENU button
To view on-screen menu
HEADPHONE jack
AUDIO L/R input jacks
VIDEO input jack
Notes:
When you disconnect the unit from the AC
●
outlet or when you have a power failure, the
sleep time will be lost.
To cancel the sleep timer, press [SLEEP]
●
SLEEP 0
repeatedly until "SLEEP 0" is displayed.
The Sleep Timer Setting display will disap-
●
pear automatically after 10 seconds of the
operation.
SLEEP 10
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote con-
trol.
GAME button
Press to set the Game mode
SLEEP button
To set Sleep Timer
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return previous channel
INPUT SELECT button
To select TV or external input
MUTE button
To mute sound
VOL(UME) K K / L L buttons
To adjust volume
To decide the command of settings
Infrared Sensor Window
POWER button
To turn TV on/off
CHANNEL ▲/▼ buttons
To select channels
X X Y Y
/ buttons