Installing A Child Seat With A Tether - Honda 2011 Fit Owner's Manual

Installing a Child Seat with a
Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Using an Outer Anchor
1. After properly securing the child
seat (see page 45), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Installing a Child Seat
TETHER STRAP HOOK
2. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
3. Tighten the strap according to the
seat maker's instructions.
ANCHOR
CONTINUED
47