Fujitsu LifeBook C2010 Bios Manual page 23

Table 13: Fields, Options and Defaults for the Security Menu
Menu Field Options
Supervisor –—
Password is:
User Password is: –—
Set Supervisor –—
Password
Set User –—
Password
Minimum User –—
Password
Length:
Password on Disabled
n
Boot: First Boot
n
Every Boot
n
KB Lock on Disabled
n
Resume: Enabled
n
Boot from All
n
Removable Supervisor
n
only
Media:
Hard Disk –—
Security:
Owner –—
Information:
Default Description
Clear A display-only field. Set is displayed when the system supervisor
password is set and Clear when it is not.
Clear A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter] Sets, changes or cancels the Supervisor Password. The Supervisor
Password may be up to seven characters long and must include only
letters or numbers (no symbols). Passwords are NOT case- sensitive.
To cancel a password press the Enter key instead of entering
characters in the Enter New Password field and in the Re-enter New
Password field. When a Supervisor Password is set it must be used
to access the BIOS setup utility.
[Enter] This field can only be accessed if the Supervisor Password is set.This
field sets, changes or cancels the User Password. The User Password
may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. To cancel
a password press the Enter key instead of entering characters in the
Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS
setup utility.
[0]
[Disabled] When set to Disabled, no password is required. When set to First
Boot, a password (User or Supervisor) is required after the Power
On Self Test (POST) before the operating system will be read from a
disk. If Every Boot is set, a password (User or Supervisor) is required
after the Power On Self Test (POST) every time the system is booted
(before the operating system is read from the disk).
[Disabled] When set to Enabled, the PS/2 mouse and keyboard inputs are
locked out upon Resume from Suspend or Save to Disk mode until
you enter the password. When set to Disabled no password is
required. If no Supervisor Password is set, this feature is not
available and no password is required.
[All] Enable password allows supervisor access only.
–— Configures hard disk security features
–— Sets Owner information.
S e c u r i t y M e n u
23