Using The Keyboard; Using The Power Options (Windows Vista); Using The Windows Mobility Center (Windows Vista); Closing The Display Panel - Fujitsu LifeBook B6230 notebook User Manual

N
OTE THAT WHEN YOU CHANGE THE DISPLAY SETTINGS IN
WILL BE RETAINED AFTER STANDBY AND RESTART
SETTINGS ARE TEMPORARY BY DEFAULT
O
PTIONS UTILITY IN THE

Using the Keyboard

• [Fn+F6]: Pressing repeatedly will lower the brightness of your display.
• [Fn+F7]: Pressing repeatedly will increase the brightness of the display.

Using the Power Options (Windows Vista)

To change the brightness using the Power Options utility, open the Control Panel and double-click on the
Power Options icon. Select "Adjust the display brightness" in the left panel, then drag the brightness bars
to the desired level. Note that the settings you make via this utility become permanent until you decide to
change them again.

Using the Windows Mobility Center (Windows Vista)

3 In the Control Panel, double-click the Windows Mobility Center icon. Drag the Display Brightness
bar to the desired level.
•
W
HEN USING
BATTERY POWER YOUR BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID
•
T
HE HIGHER THE BRIGHTNESS
BATTERIES WILL DISCHARGE

Closing the Display Panel

1
Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook.
2
Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from
opening unexpectedly.
,
C P
ONTROL ANEL
..
AC
POWER YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT
,
THE MORE POWER THE NOTEBOOK WILL CONSUME AND THE FASTER YOUR
. F
OR MAXIMUM BATTERY LIFE
49 - Display Panel
W
INDOWS
. I W V
N INDOWS ISTA SYSTEMS
BUT THEY CAN BE MADE PERMANENT BY USING THE
.
,
SET THE BRIGHTNESS AS LOW AS POSSIBLE
XP ,
SYSTEMS THE CHANGES
,
THE CHANGED
P
OWER
. W
HEN USING
- .
LEVEL BY DEFAULT
.