GMC 2014 Yukon/Yukon XL Owner's Manual page 382

manufactured. The TIN is
molded onto both sides of the
tire, although only one side may
have the date of manufacture.
of cord and number of plies in
the sidewall and under the tread.
Maximum load that can
be carried and the maximum
pressure needed to support that
load when used as a single. For
information on recommended
tire pressure see
and
.
The examples show a typical
passenger vehicle and light
truck tire size.
The type
The United States version of a
metric tire sizing system. The
letter P as the first character in
the tire size means a passenger
vehicle tire engineered to
standards set by the U.S. Tire
and Rim Association.
number indicates the tire section
width in millimeters from
sidewall to sidewall.
number that indicates the tire
height to width measurements.
For example, if the tire size
aspect ratio is 75, as shown in
item C of the tire illustration, it
would mean that the tire's
sidewall is 75 percent as high as
it is wide.
letter code is used to indicate
the type of ply construction in
the tire. The letter R means
radial ply construction; the
letter D means diagonal or bias
ply construction; and the letter B
means belted bias ply
construction.
the wheel in inches.
The three digit
characters represent the load
index and speed rating of the
tire. The load index represents
the load carrying capacity a tire
A two digit
is certified to carry. The speed
rating is the maximum speed a
tire is certified to carry a load.
A
Diameter of
These