GE AGM06 Owner's Manual & Installation Instructions page 2

IMPORTANT SAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
WARNING!
For your safe_ the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injury.
SAFETY P RECAUTIONS
Use this appliance only %r its intended
• (
pml)ose as described in this )whet s
Manual.
This air conditioner must be properly
installed in accordance with the Installation
Instructions before it is used.
Nexer unplug your air conditioner by pulling
on the power cord. Always grip plug firefly
and pull straight out from the receptacle.
Repair or replace immediamly all electric
service cords that haxe become fiwed or
otherwise damaged. Do not use a cord flint
shows cracks or abrasion damag_ along its
lenglh or at either the plug or connector end.
Turn the mode control to OFFand unplug
your air conditioner before making any
repairs or cleaning.
NOTE."We stronglyrecommendthat any servicing
be performedby a qualified individual.
For your safety...do not store or use
combustible materials, gasoline or other
flammable vapors or liquids in the vicinity
of this or any other appliance.
All air conditioners contain refiigerants,
which under federal law must be remoxed
prior to product disposal. If you are g>tfing
rid of an old product with refrigerants, check
with the company handling disposal about
what to do.
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord. For
personal safety, this appliance must be properly
grounded.
The power co_d of dfis appliance is equipped
with a 3-prong (gxounding) plug which mates
with a standard 3-prong (grounding) wall
outlet m minimize the possibility of electric
shock hazard fiom this appliance.
Power co_d may include a ctlrrent inm[xupmr
device. A test and reset button is provided on
the plug case. The device should be tesmd on a
periodic basis by first pressing the
rESrbutton
and then the RESETbutmn. If the rESrbutton
does not uip or if the RESt'button will not
stay engwged, discontinue use of the air
conditioner and contact a qualified se_Mce
technician.
Where a 2-prong wall outlet is encounmred,
it is your personal responsibility and obligation
to haxe it replaced with a properly grounded
3-prong wall oudet.
The air conditioner should ahvays be
plugged into its own indk'idual electrical
outlet which has a xoltag> rating flint matches
the rating plato.
This provides the best perfommnce and also
prexents oxerloading house wiring circuits
which cou]d cause a fire hazard from
oxerheated wires.
See the Installation Instructions, Electrical
Requirements
section for specific electrical
connection requirements.
Hme the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
2